Fixed Trim Slim/Narrow Mount for Ring Wired Doorbell Pro (2020) | 1536p HD+ | Narrow Trim Fit

Fixed Trim Slim/Narrow Doorbell Mount for the Ring Wired Doorbell Pro — For Uneven Trim & Tight Door Frames ✔ Made in USA✔ Free Shipping Over $100✔ Ships in 2-3 Business Days✔ 30-Day Replacement Guarantee This Fixed Trim Slim/Narrow Mount is a low-profile, non-adjustable bracket shaped specifically for the Ring Wired Doorbell Pro. It is built for doorways where a bulky or swiveling mount will not fit — narrow trim boards, uneven or textured trim, and tight frames where the doorbell needs to sit flat and slim against the surface. Made in the USA and 3D-printed to order from UV-stable PETG (not brittle PLA), freeze-tolerant across normal North American climates. Ships in 2-3 business days, free shipping on orders over $100, backed by our Replacement Guarantee. Compatibility — Ring Wired Doorbell Pro This mount is custom-shaped for the Ring Wired Doorbell Pro (formerly "Ring Pro 2", 2020, curved back), model year 2020. The front bracket cradles the doorbell body and the slim base anchors into your trim. Not sure of your exact model? Send a photo of the back of your doorbell to shop@doorbellmount.com and we’ll confirm fit before you order. Don’t have the Ring Wired Pro (Pro2) yet? Buy the Ring Wired Pro (Pro2) on Amazon → Fixed Trim Slim/Narrow Mount — Standard Dimensions Base Width: 3/4 inch (narrow) — the standard for the fixed trim line, sized to fit tight and uneven trim where wider mounts won’t sit flush Total Length: 2.5 inches standard Hole Spacing: 2 inches center-to-center standard — fully customizable (see note below) Wall Depth: low-profile 3/8 inch standard — sits slim against the trim (extendable — see add-ons) What’s Included: the small narrow base (embossed sizing is marked on the wall side) + 2× #6 wall screws + the model-specific doorbell screw kit Material: UV-stable PETG, 3D-printed in the USA, freeze-tolerant Price: $29.50 Need a different hole spacing? The mounting-hole spacing on this bracket is made to order. If your wall has existing holes, an old junction/gang box, or a spacing that doesn’t match the standard 2", we can print the base to your exact spacing — from 1-3/8" up to 4-1/8" (Ring Pro spacing), including slotted holes. Add it here: Customize Hole Spacing for Mounts — e.g. 2" to 2-1/4" Slotted → Key Features & Benefits Slim, Low-Profile Fit: Narrow 3/4-inch base, 2.5 inches long — for narrow and uneven trim where a swivel or boxy mount won’t sit flush. Custom-Fit for the Ring Wired Pro (Pro2): Front cradle shaped to the doorbell body — no rattles, no gaps. Customizable Hole Spacing: Match existing wall holes or a gang box — 1-3/8" to 4-1/8", including slotted. Add Angle or Extension: Tilt 0°–90° or push farther off the wall with the fixed-mount add-ons. UV-Stable PETG: 3D-printed in the USA, freeze-tolerant. Replacement Guarantee: If it doesn’t fit, we send the right one at no extra cost. Customization & Add-Ons Custom Hole Spacing: Any spacing 1-3/8" to 4-1/8", including slotted holes — Customize Hole Spacing for Mounts → Add an Angle: Tilt the doorbell from 0° up to 90° with a horizontal angle adapter sized for fixed mounts — Horizontal Angle Adapter for Fixed Mounts → Add Extension Distance: Push the doorbell farther off the wall (replaces the standard 3/8" depth) — 1/2" up to 7" available — Add Extension Length to Fixed Mounts → Color Change: Default ships in Black. For trim/brick-matching colors (red, tan, gray, white, brown) — Color Change Request → Need to aim the camera? If your install needs full angle adjustment instead of a flat fixed mount, see our 0-35° and 15-90° adjustable swivel mounts on DoorbellMount.com. Installing Your Fixed Trim Slim/Narrow Mount Identify your mount & hardware. If you ordered custom hole spacing, the base holes are pre-set to your spacing. Verify the doorbell back-mount holes line up with the bracket pocket before installing. Turn OFF power at the breaker. Remove your existing Ring Wired Pro (Pro2) and disconnect the existing 16-24V doorbell wires. Route the wires through the center opening of the base. Mount the base to the wall: Position over the trim and anchor with the provided #6 wall screws using a #2 Phillips screwdriver (drill optional pilot holes in hard trim). Attach the doorbell adapter bracket: Fasten the adapter plate to the mount face with the small center screws (provided preinstalled in most cases). Use a #1 Phillips PRECISION screwdriver. Mount the doorbell: Secure the body to the bracket using the screws PROVIDED WITH THIS MOUNT (NOT the original screws). Reconnect the wires to the doorbell terminals (polarity does not matter for AC), restore power, and confirm the field of view in the app. Caulk the top/side perimeter if exposed to driving rain; leave the bottom edge open for drainage. Tools: #2 Phillips screwdriver, #1 Phillips PRECISION screwdriver, drill (optional pilot holes), level, multimeter (wired installs only). FAQ — Fixed Trim Slim/Narrow Mount for the Ring Wired Pro (Pro2) Will this fit the Ring Wired Doorbell Pro?Yes. This Fixed Trim Slim/Narrow mount is shaped specifically for the Ring Wired Doorbell Pro. The front bracket cradles the doorbell body and the base anchors to your trim. Not sure of your exact model? Send a photo to shop@doorbellmount.com before ordering. Can I change the mounting-hole spacing to match my wall?Yes. The base is made to order; hole spacing is customizable from 1-3/8 inch up to 4-1/8 inch (Ring Pro spacing), including slotted holes. Add the Customize Hole Spacing option to your order. Can I angle the doorbell or push it farther off the wall?Yes. Add the fixed-mount Horizontal Angle Adapter (0-90 degrees) to aim it, and/or the Extension add-on (1/2 inch up to 7 inches) to clear trim or storm doors. Why a fixed trim mount instead of a swivel?It is slim and flat with a narrow 3/4 inch base, so it fits tight and uneven trim where a bulkier swivel will not sit flush. If you need full aiming, choose a 0-35 or 15-90 swivel mount instead. Is it weatherproof?Yes - UV-stable PETG (not brittle PLA), freeze-tolerant across normal North American climates. ✔ Replacement Guarantee — The Right Part, Guaranteed Send a picture of your install area and your doorbell BEFORE you order. We’ll send you the exact link to what you need. If you order and it doesn’t fit, we’ll send the correct part at NO ADDITIONAL COST. Before you order: Text or email pictures of (1) your install location and (2) your doorbell. We’ll confirm the exact product/variant that fits and send a direct link. If the part doesn’t fit: Send a picture of the doorbell and how the part doesn’t fit. We’ll ship the correct replacement at no extra cost. How to send pictures: Text/email 833-326-6868 / shop@doorbellmount.com. This guarantee covers fitment issues only. We can’t replace parts damaged during install. Need to Buy the Doorbell or Install Tools? Ring Wired Doorbell Pro on Amazon Install tools & supplies: #1 Phillips PRECISION screwdriver — for the small bracket screws #2 Phillips screwdriver — for the #6 wall screws Affiliate Disclosure: As an Amazon Associate, DoorbellMount.com earns from qualifying purchases at no extra cost to you. These small commissions help fund development of new mounts and brackets. Questions? Not Sure What You Have? Send pictures — we’ll confirm before you order: Email: shop@doorbellmount.com Text/Call: 1-833-326-6868 Standard Color: Black. For trim-matching prints, use the Color Change Request. Shop the full range at DoorbellMount.com. 3D-Printed Parts Note: Each mount is 3D-printed to order in UV-stable PETG. Minor layer lines are normal and do not affect strength or fit. Black is standard; custom colors via the Color Change Request. Get your Fixed Trim Slim/Narrow Mount for the Ring Wired Pro (Pro2) today — slim fit for tight and uneven trim, customizable hole spacing, optional angle and extension, free shipping over $100, and our Replacement Guarantee.