Fisher 10 in Solid Concentric Search Coil for Gold Bug 2 (5-Pin, July 2026 and Newer)

Fisher 10 in Solid Concentric Search Coil for Gold Bug 2 (5-Pin Connector) This is the 10 x 5 in concentric search coil for Fisher Gold Bug 2 detectors manufactured after July 2026, the units built with the 5-pin plug-in coil connector. If your Gold Bug 2 was built before July 2026 and uses the older screw-on coil collar, you need the 10 in coil for older Gold Bug 2 models instead. Check the connector at the lower rod before ordering, because the two styles do not interchange. Why Run the 10 in Coil on a Gold Bug 2 The Gold Bug 2 ships with a 6.5 in elliptical coil that is built for tight, trashy, hot-rock ground and the smallest flakes. Stepping up to the 10 in concentric coil trades a little of that micro-nugget edge for real ground coverage and depth on deeper, larger pieces. It is the coil most prospectors reach for when they are gridding open washes, tailings piles and desert flats where the small coil turns an afternoon into a week. The concentric winding gives the Gold Bug 2 a clean, symmetrical detection field that pinpoints easily and reads mineralization predictably at 71 kHz. Build is solid rather than open frame, so it sheds mud and brush instead of packing it, and the coil is sealed for wet ground and shallow creek work. Suggested Usage Gold nugget hunting and prospecting Covering open ground and tailings piles faster than the stock 6.5 in coil Chasing deeper nuggets and larger pieces below small-coil range General relic and jewelry hunting with a high-frequency machine Specifications Part Number: 10COILB-GB2-5P Size: 10 x 5 in Coil Type: Concentric Shape: Elliptical Construction: Solid Color: White Connector: 5-pin plug-in Operating Frequency: 71 kHz (set by the detector) Coil is submersible for shallow water and wet ground, control housing is not Mounting hardware and washers included Warranty: 1 year Compatibility Fisher Gold Bug 2 units manufactured after July 2026 (5-pin connector) Not compatible with Gold Bug 2 units manufactured prior to July 2026 Not compatible with the Fisher Gold Bug, Gold Bug Pro or Gold Bug DP, which use a different coil system Not sure which Fisher part fits your machine? Our Fisher parts and accessories list by detector model breaks it down model by model, and the metal detector coil guide explains how coil size, shape and configuration change what you hear in the ground. Buy From an Authorized Fisher Dealer Serious Detecting is an authorized Fisher dealer, so this coil arrives with full factory warranty coverage and support from people who swing these machines. Questions about which connector your Gold Bug 2 uses? Contact us with your serial number and we will confirm it before you order.