FingerTech Viper Tail Spinner Add-On

Add a ferocious horizontal tail spinner weapon to your Viper Combat Robot! Add a ferocious horizontal tail spinner weapon to your Viper Combat Robot!  Absorb the opponent's attack with your front armor then whip the tail around to impact their side! Mounts on the existing Viper Combat Robot. No soldering required! Kit Includes: UHMW Tail Arm:    A custom machined 1/4in thick UHMW Tail Arm with twelve mounting holes to attach everything. UHMW Motor Guard:    1/8in thick UHMW Motor Guard with mounting holes and slots, to bend around the weapon motor. Weapon Motor:    F2822-1100KV Brushless Motor (4mm shaft) + Screws Brushless Controller:    20A Brushless Speed Controller Angled Motor Mount:    The Angled F2822 Motor Mount fastens the motor solidly and aligns the blade with the floor. Blade Mount:    FingerTech Blade Mount fastens directly to the motor body for maximum strength. Blade:    A 3.5in Asymetric Titanium Blade is sharp and light and can be whipped around extremely fast! Armor:    New UHMW Front Armor to absorb the opponent's attack, leaving them open to side swipes. Fasteners:    All the screws (4pcs 6-32 x 1/4in, 4pcs 6-32 x 1/2in, 3pcs 4-40 x 1/2in, 4pcs 4-40 x 3/8in Screws) and a 1/16in Hex Wrench Instructions:    Detailed instructions with pictures: Viper-T-Spinner-add-on-R1.pdf ** If you want to swap to a different Weapon Blade, the FingerTech Blade Mount fits all of our custom blades and the Tail Spinner can fit anything up to 10inch diameter (but check your weight!) Specifications: Weight: 138grams (4.84oz) when replacing the heavier polycarbonate front armor with UHMW front armor. Added to the base kit, the total weight is 433g (15.27oz) with a 300mAh 2S lipo battery, or 440g (15.52oz) with a 300mAh 3S lipo battery. (9V battery not recommended to power this Add-On.) Requires: Weapon Safety Lock 5/64" Hex Wrench (came with your Viper kit) Phillips screwdriver #2 Threadlock liquid (medium strength) Zipties, or cable-ties Safety: As with anything related to combat robots, it is potentially dangerous to add a spinning weapon to a robot. Never power up the robot outside of a safety enclosure. Always use a safety lock and follow proper activation procedure.