FG ROCK 11-20 PACK

********3D Print Files Only!********* Digital Download Only, 3d Print .stl files *********************************   The FG Rock or Full Grip Rock series come with 3 levels of 3d printable traction!! FG Rock: regular 3d printed surface FG1: Grip level 1 FG2: Grip level 2 Note: slicer will error, print anyway, do not add supports These are great rocks for the Vertical packs, giving you A LOT of traction on those steep 30 or 40 deg inclines!! CRAWLAGON! FG ROCK 11-20 PACK RC rock crawling system for 1/18 - 1/32 scale crawlers. Fully expandable and customizable RC Crawler course, Sky's the limit! Purchase is for FG ROCK 11-20 PACK - Designed by Dirt Digg-ler Offroad LLC DBA CRAWLAGON™, all rights reserved, for personal use only, No commercial use. Each tile is 150mm wide (~6") and are interlocked by locking pins underneath. You can configure and re-configure any way you would like! Join our CRAWLAGON facebook group and show off your builds. ENJOY!!!! 3D printing settings Print Instructions - *** WHEN PRINTING FG2 YOU WILL GET AN ERROR IN YOUR SLICER. JUST PRINT ANYWAY AND IT WILL WORK. DO NOT ADD SUPPORTS*** - Level your bed properly to avoid locking pin problems. If you have trouble with leveling, try printing with a raft. - Different sized pins are included to compensate for any bed leveling issues and different materials. - I can print these models on my Bambu Labs A1 without supports, even with sharp undercuts. Other printers might require support structures. - Use a consistent 10%+ infill setting to avoid fitment problems. Changing infill percentages can affect wall shrinkage. If needed, you can add more wall loops to compensate and additional sized pins are included.