Rain Bird - FD101TURF FD Series Field Decoder - Signal Line, Individual Valve

Rain Bird Field Decoders provide easy, cost-effective installation and expansion for SiteControl Decoder or ESP-LXD Decoder Central Control Systems. Decoders are installed out of sight to help protect them from the elements and vandalism. A technology long-since proven on golf courses around the world, Rain Bird decoders provide "best-in-class" field control on centrally controlled 2-wire irrigation systems. Installed underground and featuring simple, low-cost wiring, decoders are an aesthetically pleasing, full-featured, economical option for reliable in-field control. A simple wiring configuration and absence of protective enclosures keeps installation and maintenance costs low. Rain Bird decoders are a “true lower than 30 volt” system that utilize a two-wire path of 14-gauge wire connecting the central control system, decoders and valves or valve-in-head sprinklers.  With all electronic components fully sealed within a water‑tight enclosure and buried underground, damage from floods, frost, rodents or vandals is virtually eliminated. Rain Bird decoders are an especially good choice for flood plains. Features: Mounting: In valve box or direct burial. Power Draw: 0.5 mA (idle) 18 mA (per active solenoid) Length: 3.35 in. (85 mm) Diameter: 1.77 in. (45 mm) Solenoids: 1 address, 1 solenoid per address Wires: Blue to cable, white to solenoid Output Power: Adjustable from controller Encapsulation: Fully waterproof Address: Pre-coded from factory (i.e., no switches) Nominal voltage: 34 Vpp (24V AC) from 2-wire line Minimum voltage: 21 Vpp (15V AC) Standby Current:0.5 mA Eectrical Output: Max. voltage: 33 Vpp Max. load: 1 Rain Bird solenoid Electrical Resistance: Max. 3 ohms Cable length: 456 feet Wiring: 2 x 14-gauge (1.5 mm2) solid copper, UF insulated type Working range: 32° to 122° F (0° to 50° C) Storage range: -4° to 158° F (-20 to 70° C) Humidity: 100%