FASS Inline Fuel Line Strainer Prefilter

My FASS In-Line Fuel Strainer - Replacement Pre-Filter - Inline Fuel Filter - Straining Filter The use of a FLEETGUARD universal in-line fuel filter screen is required on the following FASS Pumps or any other motor using an inline prefilter to prevent damage to the fuel pump. This pre-filter fuel line strainer is a screening element that removes the large pieces of debris from the fuel supply before they enter the pump and cause damage. These pre-pump fuel filters are also known as Straining Filters. These inline pre-filters can be used on any engine that uses 3/8" or 1/2" fuel supply lines. The FASS fuel line filter - In Line Strainer element benefits: Are offered as a universal replacement in-line fuel filter element.  This high flow inline pre-filter element is an inline fuel strainer for pre-pump installation. Are available in either 3/8" or 1/2" I.D. sizes for in-line fuel line installation. Both of these inline pre-filters from Fleetguard have a 24-micron stainless mesh inner cage. It can hold a 13-gram capacity which prevents large particles from entering the fuel pump. The Fleetguard replacement inline fuel filters are designed for inlet side filtration only! Fleetguard In-line Fuel Strainers are a high flow element that will not restrict fuel supply to your fuel pump. These prefilters can be used on any fuel line for the removal of large contaminants prior to entry into the fuel pump. This FASS In-line Fuel Strainer is the recommended replacement pre-filter element for the following FASS Pumps using the FASS FL-1001 3/8" fuel line: FASS FA Adjustable Fuel Pumps  FASS FO Non-Adjustable Fuel Pumps FASS HPFP Pumps FASS Platinum Series Pumps FASS Dodge Replacement Pumps FASS DRP-02 Lift Pumps FASS DRP-04 Lift Pumps FASS Dura-Max Flow Enhancer Pumps Physical Dimensions of the FASS FF-5079 3/8" In-Line Fuel Strainer Largest element OD - 48.489 mm (1.909 in) Overall Height: - 98.81 mm (3.89 in) Inlet Connection - 0.375" Outlet Connection - 0.375" This FASS 1/2" In-Line Fuel Strainer is the recommended replacement pre-filter element for the following FASS Pumps: FASS FA Adjustable Fuel Pumps with FASS FL-1002 1/2' fuel line. Physical Dimensions of the FASS 1/2" In-Line Fuel Strainer Largest element OD - 48.489 mm (1.909 in) Overall Height: - 109.98 mm (4.33 in) Inlet Connection - 0.500" Outlet Connection - 0.500" NOTE: These FASS 3/8" and 1/2" In-Line Fuel Strainers should not be confused with an inline fuel filter and must be installed in 3/8" or 1/2" I.D. Fuel Lines only! If your fuel pressure has decreased it is now time to change your pre-filter in-line element. These filter elements are a Pre-Filter, not a Fuel Filter! Please make sure you order the correct fuel filter by measuring the inside diameter of your fuel line.  KLM Performance carries these fuel filters for premium fuel filtration to keep your fuel system running clean, efficient, and at the designed powerful fuel flow levels. All of the filters sold by KLM Performance are offered with quantity discounts. If you do not see the fuel filter you are looking for, please do not hesitate to call us or contact us. Engine: All Engines running a lift pump. Flow Rate:  95 to 290 Gallons Per Hour Fuel Type: Gasoline or Diesel Fuel Filtration Level: Twenty Four Micron Rated Filtration. Item Number : FG FF5079 / FF52895 Make: NA Model: NA Year: NA Manufacturer Part No: FF-5079 | FF-5289 Product Application: All FASS Adjustable Fuel Pumps or HPFP Lift Pumps. Height: 4 Width : 5 Brand: Fleetguard FAQ: Where is the proper placement of this filter when it is installed? This in-line pre-filter is designed to be installed on the suction side of your fuel pump. What is the process to replace this in-line fuel filter? With the engine off, loosen the two stainless steel band clamps that secure both ends of the fuel filter. Remove the inline filter. Replace this filter with the new in-line filter following the fuel flow arrow to allow proper filtration. Tighten the two band clamps. Start the engine and check for leaks., Part Number : FG FF5079 / FF5289 Manufacturer: Fleetguard Product Note: These are the In-Line Pre-Filter fuel filter elements designed to contain large particles before they are ingested into the fuel pump. These filters are part of a regular maintenance schedule and need to be replaced as soon as your fuel pressure drops!