Fass Drop In Filter System | 2019-2023 6.7 Cummins

The FASS Drop-In Series Diesel Fuel System was engineered by FASS to be the most effective filtration solution for the 6.7L Cummins. Backed by a limited lifetime warranty, the Drop-In Series Fuel System protects your 6.7L Cummins from the issues caused by fuel contamination. This kit is designed to work with the factory lift pump and does not require any modifications to install on most trucks, it is not designed for use on cab and chassis trucks (no bed from the factory) and the 2019-2020 CP4 equipped trucks must have the recall done prior to installation. Without proper fuel filtration, modern diesel injection systems are prone to excessive wear, which can cost THOUSANDS! By removing over 99% of the water from your diesel fuel, along with entrained air and debris down to 2 Microns, the Drop-In Series System protects the 6.7L Cummins’ injection system from premature failure. Additionally, by eliminating the contaminants mentioned above, our Drop-In Series System for the 6.7L Cummins optimizes MPG (results will vary), restores horsepower, and sharpens throttle response. And if reliability, optimized MPG, restored horsepower, and a sharper throttle response aren’t enough, this system can be installed in an hour or less! This is a true plug-and-play system, requiring no cutting, wiring, or additional modifications. Our industry-leading water removal capabilities (3rd-party proven to exceed 99%) are reinforced by the unique design of our Extreme Water Separator (XWS). If our XWS reaches capacity, it acts as a dam, shutting down your truck and preventing major destruction of fuel system components. · FASS Drop-In Technology was developed to achieve industry-leading filtration with the simplest possible installation—making our Drop-In Series Systems a true bolt-in upgrade. If you’re mechanically inclined, a Drop-In Series Fuel System can be installed in your driveway in less than an hour! But don’t let the easy installation fool you—our Drop-In Series Fuel Systems offer the same world-class filtration as our Titanium Signature Series and Industrial Series lines. Performance Radius Cuts (PRC) are an advanced machining technique used to improve the flow of fuel through the FASS System by creating smooth-flowing cuts within the filtration system. This prevents the reintroduction of air and vapor back into the fuel and prevents eddy currents from forming within the corner of a 90-degree sharp angle. FASS Drop-In Fuel Systems are the only Fuel Air Separation System that incorporates these exclusive Performance Radius Cuts, lesser competitors commonly use T-Bone and square 90-degree fittings that can limit fuel flow, cause restrictions, and reintroduce air back into your fuel. IMPORTANT NOTES: 2019-2020 trucks must have the CP4 recall done prior to installation Designed for use with the stock fuel tank, trucks with oversized tanks or cab and chassis model trucks may require modification to install Features & Benefits: 100% Drop In Installation Retains Factory Lift Pump & Water Sensor Increases Lubricity By Up To 10% Over The Factory Setup 2 Micron Filters To Remove Water & Contaminants Not Designed For Cab & Chassis Trucks (No Bed From Factory) 2019-2020 Year Trucks Must Have CP4 Recall Done Before Installation Designed for use with most 2019-2023 6.7 Cummins Pickups