Falling Leaves - Flexible Slate Stone Veneer - Translucent

White River Hardwoods ?ú LuxeStone Collection LuxeStone Falling Leaves Translucent Natural Stone Veneer ?ú Backlit ?ú Interior & Exterior Ultra-thin natural stone in warm orange, amber, and gold ƒ?? engineered to transmit light. LuxeStone Falling Leaves transforms any surface into a glowing, luminous display, where the organic beauty of stone and the drama of backlit design meet. Stone thin enough to carry light ƒ?? the warmth of autumn, illuminated from within. Available Sizes Format Options Dimensions Best For Use 94?«ƒ?? L ?? 47?¬ƒ?? W Large backlit feature walls, statement facades, commercial installations Interior / Exterior 48ƒ?? L ?? 24ƒ?? W Backlit accent panels, kitchen backsplashes, fireplace surrounds Interior / Exterior 11ƒ?? L ?? 4ƒ?? W Sample evaluation, detail fills, small accent applications Interior / Exterior * All sizes use adhesive installation. The translucent backing requires a properly installed light source behind the panel to achieve the full backlit effect. SKUs: LXFL-9447 ?ú LXFL-4824 ?ú LXFL-1104 Why This Material The Stone in Detail ƒ?? Translucent Stone ƒ?? Light Passes Through LuxeStone Falling Leaves is engineered at just 0.06ƒ?? thick ƒ?? thin enough to allow light to pass through the genuine stone surface. The result is a luminous, glowing effect impossible to replicate with any opaque material. ƒ?ýƒ?ý 100% Natural Stone Surface The face is genuine natural stone ƒ?? not composite, not printed film. Warm tones of orange, amber, and gold with organic variation across each panel. Every installation is distinct, shaped by the natural patterning of the stone itself. ƒ?? Customizable Lighting Effects Warm white light deepens the amber and gold tones for an inviting, natural glow. Cool light creates a crisp, contemporary contrast. Colored LED sources open up entirely different design possibilities ƒ?? the panel responds differently to every lighting choice. ƒª­ Interior & Exterior Rated Despite its ultra-thin profile, LuxeStone Falling Leaves is suitable for both indoor and outdoor applications. Lightweight and easy to cut and handle, it installs cleanly without the heavy equipment traditional stone slabs require. Technical Specifications Key Facts Material 100% Natural Stone Type Translucent Veneer Pattern Falling Leaves ƒ?? Orange, Amber & Gold Thickness 0.06ƒ?? (Ultra-Thin) Panel Sizes 94?«??47?¬, 48??24, 11??4 Installation Adhesive + Backlit Light Source Use Interior & Exterior Applications Feature Walls, Backsplashes, Facades, Art Installations Maintenance Soap & Water; Periodic Sealing Before You Install Light Source & Surface Prep Plan Your Lighting First The backlit effect depends entirely on a properly placed light source installed behind the panel before it is adhered. Select your light type ƒ?? warm white, cool white, or color ƒ?? and position it for even distribution across the full panel area before committing to installation. Uneven lighting will be visible through the stone. LED strip lighting recessed into the substrate is the most common approach for a clean, professional result. Clean, Sound, and Dry The wall or substrate surface must be clean, dry, and free of dust or debris. At 0.06ƒ?? thick, any surface irregularities beneath the panel may telegraph through to the face. A smooth, flat substrate gives the cleanest adhesion and the most even light transmission. Installation Step by Step 1 Plan & Install Light Source Select and position your light source behind the substrate. Test for even light distribution across the intended panel area before proceeding. Adjust placement until the glow is consistent edge to edge. 2 Prepare the Surface Ensure the substrate is clean, flat, and dry. A smooth surface is especially important for translucent panels ƒ?? any bumps or voids beneath the panel can interrupt light transmission. 3 Cut to Size Use a sharp utility knife or score-and-snap method to cut panels to your required dimensions. The ultra-thin profile cuts cleanly without power tools. 4 Apply Adhesive Spread adhesive evenly across the substrate surface. Use a translucent or clear adhesive where possible to avoid dark spots showing through the panel face under backlighting. 5 Press and Align Set the panel into position and press firmly across the full surface. Check alignment and confirm the panel lays flat ƒ?? air pockets will appear as dark spots when backlit. 6 Test the Effect Once the adhesive has set, activate your light source and evaluate the result. Minor adjustments to light intensity or color temperature can be made at this stage before final finishing. Installer Advice Pro Tips Use Clear Adhesive Standard white or grey adhesive can create visible dark patches when the panel is backlit. Use a clear or translucent-curing adhesive to maintain even light transmission across the entire panel face. Even Light Distribution Hot spots and dark zones are the most common issue with backlit installations. Use LED strip lighting at consistent spacing and test the distribution thoroughly before the panel goes up ƒ?? correcting it after installation is not practical. Handle with Care At 0.06ƒ?? thick, these panels are far more flexible than standard stone ƒ?? handle flat and support the full panel during positioning to avoid cracking. Store flat in a protected environment prior to installation. Care & Maintenance Clean LuxeStone Falling Leaves with mild soap and water. Avoid abrasive pads or harsh chemical cleaners that may scratch or cloud the stone surface. For exterior installations, periodic sealing with a quality penetrating stone sealer is recommended. Ensure all electrical components of the backlighting system comply with local codes and are installed by a qualified electrician where required. LuxeStone Falling Leaves ƒ?? natural stone, made luminous.