FAAC S800H Replacement In-Ground Operator Unit

Replacement In-Ground Hydraulic Operator Unit for FAAC S800H The FAAC S800H ENC is a 24 VDC in-ground hydraulic swing gate operator using hybrid technology with an integrated high-resolution encoder for precise position control across the full travel arc. These listings are operator units only, intended for technicians replacing a failed unit within an existing S800H installation where the control board, wiring, and mounting hardware remain serviceable. Four configurations are available, covering the CBAC and SBW variants in both 100° and 180° opening angles. Both are rated for gates up to 1,760 lbs on continuous duty, with an IP 67 protection rating for permanent in-ground installation. Key Features Operator unit only; E024U control board, receiver, transmitters, photobeams, support box, and mounting hardware not included Hybrid hydraulic technology with integrated high-resolution encoder for precise gate position control 100° and 180° opening angle versions available Built-in battery backup maintains operation during power outages IP 67 rated for permanent in-ground installation in all weather conditions UL 325 listed, Class I, II, III, and IV Technical Specifications Input Voltage: 24 VDC Power: 60 W Max Torque: 442 lbf.ft (600 Nm) Max Angle Speed: 8.2°/s Max Opening Angle: 100° and 180° versions available Max Leaf Weight: 1,760 lbs (800 kg) Max Leaf Width: 13 ft (CBAC); 16 ft (SBW) Operating Temperature: -4°F to 131°F (-20°C to +55°C) Duty Rating: Continuous Protection Class: IP 67 Hydraulic Locks: Included (CBAC); Not included (SBW) Certification: ETL listed, UL 325 Class I, II, III, and IV Manufacturer: FAAC Condition: New Available Models CBAC: The CBAC variant holds the gate securely in both open and closed positions using built-in hydraulic locks. Specified for standard installations where the gate does not need to yield under wind load. CBAC 100° Standard Finish (108720): Standard configuration with integrated hydraulic locks, 100° opening angle, max leaf width 13 ft. CBAC 180° Standard Finish (108722): Standard configuration with integrated hydraulic locks, 180° opening angle, max leaf width 13 ft. SBW: The SBW allows the gate to yield under significant wind force, reducing stress on the operator and gate structure. Specified for installations in areas subject to strong winds. External locks can be added separately for additional security. SBW 100° Standard Finish (108724): High-wind configuration without hydraulic locks, 100° opening angle, max leaf width 16 ft. SBW 180° Standard Finish (108725): High-wind configuration without hydraulic locks, 180° opening angle, max leaf width 16 ft. Conclusion Confirm the variant, opening angle, and part number against the existing installation before ordering. For complete new installations, the S800H Single Kit and S800H Secondary Kit are available separately on elitegates.net. For bi-parting applications, one primary and one secondary kit are required. Download Specs Download Manual