F9 Groundskeeper Concrete Maintenance Cleaner

Makes concrete pop with our industrial concrete maintenance cleaner! F9 Groundskeeper will make the concrete absolutely “POP”, remove tire marks, soils and grime in the process.  It is used when topical oil stains have been pre cleaned and the stains are actually at or beneath the surface of the concrete.  When using this maintenance cleaner, your customers will be telling you that they have never seen their concrete so clean… and this clean will last longer than when using ANY and I mean ANY high pH cleaner.  Concrete cleaned with F9 Groundskeeper will stay cleaner longer and be easier to clean the next time around.  From my personal experience and from what other contractors who have been using F9 Groundskeeper are reporting, after cleaning the same concrete 2-3x with F9 Groundskeeper, the time spent cleaning the same contracts have been reduced by 25-40%.  This is Big! Time is money!   *HAZMAT item, 5 Gallon, 55 Gal, & 275 Gal. Totes Available, Call for quote*   F9 Groundskeeper High Performance Maintenance Cleaner - 1 Gallon Bottle. For Industrial Use Only, Not for Residential Use F9 Groundskeeper is a high performance maintenance cleaner to use after your initial degreasing, pre-cleaning or just hot water washing. It is a buffered low pH product that will continue to brighten the surface and deep clean the surface every time it is applied. Unlike high PH products, the surfaces cleaned will stay cleaner longer and not get as dirty over time. This means you will use less product to clean the surface and at the same time increase your workspeed on the job. So, save money on product, the surface stays cleaner longer and you save time on the job. Great combo!   Features • Reduces Time Spent On The Job • Surface Stays Cleaner Longer • Quickly Removes Contaminates • Biodegradable • Phosphate Free   Technical Specs: Pre-Cleaning: F9 GroundsKeeper (F9 GK) is a highly concentrated cleaner to use after your initial cleaning/degreasing. If existing oil and hydrocarbon stains are present, it is recommended to clean those stains with F9 Double Eagle Degreaser first. Once you can see the concrete pores below the stain then apply F9 GK to surface (at recommended dilution ratio) and surface clean. This will get the concrete set up for maintenance cleaning with F9 Groundskeeper. Dilution Ratios (Water to Product): For Use on Concrete, Bricks, Pavers, Most Tile, Stone, Grout and Masonry Hard Surfaces. Initial Cleaning: 8:1 to 10:1. Pre-wet surface with water and spray on. Use more concentrated for heavily soiled areas and less concentrated for less soiled areas. Always surface clean after application. Maintenance Cleaning: 10:1 to 20:1. Pre-wet surface with water and spray on. Use more concentrated for heavily soiled areas and less concentrated for less soiled areas. Always surface clean after application. Cleaning Instructions: Direct Application: Pump Sprayer, Electric or Air Diaphram Dilute F9 Maintenance Cleaner at recommended dilution ratios (Water to Product). Always add product to water, NOT water into product! Dilution will depend on how dirty the areas are. Product may be diluted up to 20:1. Dwell 2-10 minutes and surface clean. Brushing may be useful on stubborn areas. Downstream Application Downsream application is OK, but make sure final dilution of product is 10:1 up to 20:1 to meet dilution guidelines above. CAUTION! Never use F9 Groundskeeper undiluted or get undiluted product on porous surfaces. F9 Groundskeeper may etch surfaces at strong dilutions. ALWAYS perform a test to confirm compatibility.