F150 and Super Duty Sync 4 12" Display Bracket

Doing your own Sync 4 12" swap in your 2015-2020 F150 or 2017-2022 Super Duty? Need a way to mount your OEM Ford screen? This bracket is for you! This works with the factory ford 12" display that comes in 21+F150's and 23+ Super duty's. Other Ford 12" LCDs may work but we only support the LCD with the part number LS120M5LX08 on the back. If you're not sure if your display will work please send us a picture at support@oemplusupgrades.com of the rear of the display and we can confirm if it will work with our bracket. This bracket keeps your factory radio and HVAC controls so you don't have to mess with poorly fitting trim or new HVAC controls that don't work properly. Please select if you currently have 2 or 3 button openings above your screen so we can get you the correct bracket! Included in the box: -APIM Mounting bracket -Screen Mounting bracket -Hardware for mounting the screen and APIM -Optionally include the display pre-installed so you don't need to source one! No other parts are included and there is no other support on this swap provided. 2 year warranty on this bracket set. Our bracket is made from carbon fiber filled ASA plastic that is extremely strong and UV resistant. No need to worry about it breaking or fading over long term use! Note: A RIGHT ANGLE LVDS cable where it plugs into the screen is required or damage may occur to the bracket, display, or LVDS cable when installing in the vehicle. Brackets damaged due to using improper LVDS cable are NOT covered under warranty. While it is possible to get a straight in LVDS cable to work there is an extremely high risk of damaging the bracket so we do not recommend it. Attempt at your own risk. Purchase the right angle cable here: https://oemplusupgrades.com/products/ford-right-angle-large-format-display-lvds-cable