F-One (T1) Eagle HM Carbon 690 Foil Plane-USED

What is included: F-One Eagle HM Carbon 690 front wing, XXS Carbon Fuse (non-monoblock) , DW 210 HM Carbon Stabilizer, EVA soft covers, and hardware to assemble foil plane. What is missing: Nothing Modifications: None Damages: Very small scratches on the underside (left and right side of front wing), Trailing Edge Tip of stab expanded (noted in photos) Repairs: None Grade: C  This foil was used frequently and some cosmetic scratches and wear and tear are apparent. There is a ding on the tip of the stabilizer. F-One Eagle HM Carbon 690 Foil Plane  The Eagle HM Carbon Foil is the ideal foil for anybody seeking speed and fantastic downwind abilities. With its 9.5 aspect ratio, very thin profile and upturned winglets, the Eagle’s induced drag is reduced to a minimum. It is a very efficient foil whose lift will allow you to stay above the water and cruise for longer than you could have ever imagined at any speed. Simultaneously, its upwind abilities are noteworthy, bringing comfort, stability, and constant speed to your wing foiling rides. Pumping is effective and precise, and maneuvering will feel easy in any conditions. Finally, the traction in your arms is reduced while wing foiling, thanks to the low drag of this foil. Built using the Monobloc structure with pre-preg carbon, the foils are both very light and strong. This setup brings improved load transmission and better stiffness throughout the different parts for maximum control. The High Modulus Carbon fiber layup leads to even more rigidity and dependability that will propel you to incredible performances in each session. The TITAN connection allows to plug in either an aluminum or carbon mast, and the fuselage is split in two to facilitate transport. The Eagle HM Carbon foils are available in 790 cm², 890 cm², 990 cm², and 1090 cm² to satisfy a wide range of riders looking for exhilarating sensations in wing foil and downwind. They are recommended with the DW210 HM stab, just as thin as the front wing. This stabilizer will allow you to gain even more speed and pumping efficiency.   F-One Eagle HM Carbon Foil Technology High Modulus The High Modulus Carbon fiber layup is 1.5x stiffer than the regular carbon fiber used in other constructions. The percentage of high modulus fiber has been carefully adjusted to obtain the best stiffness in both bending and torsion while keeping enough comfort for any kind of practice.  Pre Preg Technology Pre-preg makes the foils stiffer and stronger. With pre-preg fabrics, the carbon fiber is directly impregnated with epoxy resin by its manufacturer. This guarantees a perfect ration between epoxy and carbon and represents the highest quality process. It is then cured at high temperature, bringing strength and durability.  Quality control is much better and so is the working environment for the people building F-One foils. Pre-preg fabrics offer the lightest weight with the best mechanical properties of carbon fiber. Titan Connection The Titan connection enables a very stiff and direct connection between two parts, locking efficiently any movement in all directions. Its format is compact which is hydrodynamically efficient and very easy to use, assemble, and disassemble.