Adjustable Depth Extendable Doorbell Mount | Optional Angle | Universal Selection

Extendable Doorbell Mount | Adjustable Depth & Optional Horizontal Angle Extend Your Doorbell Past Deep Brick or Obstructions! Is your doorbell mounting location recessed far behind thick brickwork, stone, or deep siding? Need to extend your video doorbell significantly forward to clear an obstruction or achieve a proper camera view? This innovative Extendable Doorbell Mount is the ultimate solution, offering adjustable depth to perfectly position your doorbell. Ideal for situations where standard mounts or simple extensions leave your doorbell hidden, hard to reach, or with a compromised view, this mount bridges the gap and ensures optimal visibility and accessibility. Customize Your Extendable Mount: Key Options This versatile mount requires you to select options to perfectly match your installation needs: 1. Choose Your Extension Range (Base Size): Select the base size that provides the total adjustable depth you require. The length is measured from your wall/trim surface to the flat plate where your doorbell (or its adapter) will attach: Small Base: Extends from 2 inches up to 3-3/4 inches Medium Base: Extends from 3 inches up to 4-3/4 inches Large Base: Extends from 4 inches up to 5-3/4 inches (Each base size offers 1-3/4 inches of fine-tuned depth adjustment within its specified range using a secure locking mechanism.) 2. Choose Your End Bracket Type: Select how you want to aim your doorbell at the end of the extension: Fixed Straight End Bracket: Holds the doorbell facing straight out, perpendicular to the extension arm. This is a non-angled bracket. Angle Adjustable End Bracket: Allows fixed horizontal (side-to-side) aiming of the doorbell from -45° left to +75° right relative to straight out. Angle is set and locked with screws. (This is NOT a free-swivel joint.) Attaching Your Specific Doorbell - Important! This listing provides the extendable arm and your choice of end bracket (Fixed Straight or Angle Adjustable). The end bracket provides a flat mounting surface. How your specific video doorbell model attaches to this end bracket needs consideration: You may need to purchase a separate model-specific adapter plate from our store that screws onto this mount's end bracket, which then provides the correct hole pattern for your doorbell. Alternatively, you might be able to attach your doorbell's own original backplate/wedge directly to this mount's end bracket. This may require you to drill your own appropriately sized pilot holes into the PETG end bracket if the existing holes do not align with your doorbell's backplate. Please contact us BEFORE ordering if you are unsure how your specific doorbell model will attach to the end bracket you select. We can help determine if a separate adapter plate is recommended for your device. Base Mounting: The part of this mount that attaches to your wall/trim is 3/4" Wide x 3-1/4" Long with 2-5/8" hole spacing (center-to-center). Ensure your mounting surface is at least 3/4" wide. Key Features & Benefits: Adjustable Extension Depth: Precisely position your doorbell forward from the wall (choose from Small, Medium, or Large extension ranges). Multiple Depth Ranges: Options cover extensions from 2 inches up to 5-3/4 inches. Optional Fixed Horizontal Angle: Choose a fixed straight end bracket or an angle-adjustable end bracket (-45° to +75° side-to-side) for perfect aiming. Solves Deep Recesses & Obstructions: Ideal for mounting past thick brick, stone, or other architectural features. Improves Camera View & Accessibility: Ensures your doorbell is visible, easy to use, and captures the desired view. Clean Wire Management: Allows wires to pass through the center of the mount for hardwired doorbells. Durable PETG Construction: Made from robust, impact-resistant, and weather-resistant PETG plastic – superior to PLA for outdoor use. Fixed Base Footprint: Wall-mount base is 3/4" Wide x 3-1/4" Long with 2-5/8" hole spacing. Mounting Hardware Included: Comes with necessary screws for assembling the extension and chosen end bracket. (Wall mounting screws/anchors NOT included). General Installation Outline Detailed instructions are included. Always ensure safe practices. Tools & Prep: Gather: Drill, PH1 & PH2 Philips Bits, Level, Anchors (if needed for wall), your doorbell, and any adapter plate if purchased. Turn OFF power at the breaker if hardwiring! Mount Base Plate: Position the 3/4" Wide Base Plate on your trim/wall over wires. Attach securely using appropriate screws for your surface (e.g., #6 screws, use PH2) and anchors for the 2-5/8" spaced holes. Ensure base is level & secure. Don't overtighten base screws. Assemble & Attach Extension Arm: Assemble the extendable arm components for your chosen range (Small, Medium, or Large). Attach the assembled arm to the wall base. Attach End Bracket: Secure your chosen **End Bracket** (Fixed Straight or Angle Adjustable) to the end of the extension arm using the provided screws. Set Depth & Angle: Adjust the extension arm to the desired depth and lock it. If you chose the Angle Adjustable Bracket, set your desired horizontal angle (-45° to +75°) and tighten its set screws. Attach Doorbell (Critical Step - Read Carefully): Route wires through the end bracket. Option A (Using Our Adapter Plate): If you purchased a separate model-specific adapter plate from us, screw it onto the End Bracket now using small provided screws. Then, attach your doorbell to that adapter plate. Option B (Using Doorbell's Own Backplate): Align your doorbell's original backplate/wedge onto the End Bracket. If holes align, secure with appropriate short screws. If holes do NOT align, you may need to carefully drill new pilot holes into the PETG End Bracket to match your doorbell's backplate. Verify doorbell attachment method BEFORE drilling into the End Bracket. Contact us if unsure. Use appropriate short screws; long screws can damage parts. Wire Doorbell & Finalize: Connect wires per doorbell instructions. Mount doorbell. Secure all locking screws on the extension and angle bracket (if applicable). Turn power on & test. Always follow safety rules & your doorbell's specific guidelines. Wall mounting hardware depends on your surface type. Enhance Your Home with Versatile Doorbell Placement This Extendable Doorbell Mount provides the flexibility needed for optimal doorbell positioning. The adjustable depth and optional horizontal angle adjustment make it easy to overcome challenging mounting locations, ensuring visitors can easily reach your doorbell and your camera gets the right view. Improve curb appeal and security simultaneously! Easy Installation Concept & Durable Design Installation involves mounting the base securely to your wall or trim, adjusting the extension to the desired depth, and then attaching your doorbell (refer to important doorbell attachment notes in compatibility and installation). Built with sturdy, weather-resistant PETG, this mount is designed to withstand the elements and provide reliable service for years. Perfect for Any Home Style Whether your home is modern or traditional, the clean design of the Extendable Doorbell Mount complements various doorbell styles and home aesthetics, offering a blend of high function and pleasing form. Recommended Add-ons & Customizations: Tailor your installation further: Model-Specific Adapter Plate For easiest attachment, consider our adapter plates pre-drilled for many popular doorbells. These screw onto the end bracket of this mount. Angle Shims (for 3/4" Base) If your 3/4" wide mounting trim is angled, contact us about shims compatible with this base. Custom Base Hole Spacing (for 3/4" Base) Need to match non-standard wall holes (different from 2-5/8") for the 3/4" base? Add this service to your order. Custom Color Want your mount in White, Brown, Grey, or another color? Add this service to your order. Product Examples (See listing photos for details or contact us for more examples!) Questions About Doorbell Attachment, Customization, or Color? Need help determining how your specific doorbell will attach to the end bracket? Interested in a custom angled base for angled trim (requires quote)? Unsure which extension range is best? Contact Ricky for assistance! Send pictures of your mounting area and doorbell model. Email: shop@doorbellmount.com (Send Pictures!) Text/Call: 1-833-326-6868 (Text Pictures!) Standard Color: This mount comes in Black. For other colors, please use the Color Change Request listing or contact us directly. Doorbell & Doorbell-Specific Adapter Not Included: This listing provides the extendable mount base, your choice of extension range, and your choice of end bracket (Fixed Straight or Angle Adjustable). A separate model-specific adapter plate (available here) or user modification of the end bracket may be required to attach your doorbell. Angle Adjustment: If selected, the angle adjustable bracket provides HORIZONTAL (side-to-side) adjustment from -45° to +75°. It is not a free swivel joint. 3D Printed Quality: Our 3D printing process produces strong, high-quality functional parts. Minor cosmetic variations or layer lines, inherent to the technology, may be visible but do not affect the mount's durability or function. Your satisfaction is guaranteed – please reach out with any concerns! Order your Adjustable Depth Extendable Doorbell Mount today and conquer challenging recessed installations! Remember to choose your extension range and end bracket type, and plan your doorbell attachment.