Expansion Shelf Splice Kit

Join two Expansion Shelves to create an adjustable-width mega-shelf. Possible widths are: Expansion Shelf Large millimeters:  489, 540, 591, 641, 692, 743 inches:  19.25, 21.25, 23.25, 25.25, 27.25, 29.25 Expansion Shelf Medium millimeters:  391, 442, 493, 544, 594 inches:  15.4, 17.4, 19.4, 21.4, 23.4 Expansion Shelf Small (discontinued) millimeters:  437, 488, 538, 589, 640, 691 inches:  17.2, 19.2, 21.2, 23.2, 25.2, 27.2 CAUTION:  The splice kit is strong, but not invincible.  Weight should be evenly distributed across the spliced shelves.  If heavy gear is placed on a spliced shelf, the weight should be centered above the gear support edges on the underlying stand. ASSEMBLY:  Tools are not necessary. All 4 pairs of fasteners must be used.  Join the screws and nuts by holding the flat top of the screw in place with your fingertip, while spinning the hex nut with your other hand.  But if you have a 1/16" (1.5 mm) hex key you may use it. INCLUDES QUANTITY OF 4 EACH: #6-32 x 1/2" long low-profile screw, color:  black #6-32 hex nut with integrated lock washer, color:  black Rubber bumper to hold gear with small feet above the screw heads Shelves are not included.  They must be purchased separately. If you are splicing shelves for use on our Adapt Small or Adapt Medium stands, consider increasing your stand's width by purchasing Long Telescoping Tubes to replace the standard-width telescoping tubes in your stand.  NOTE:  Adapt Large stands come standard with long telescoping tubes. NOTE:  This kit works perfectly for any SynthRISE or KVgear Expansion shelves purchased after January 2024.  If you have shelves purchased prior to that you will need to drill holes in your shelves in order to join them together.