Evolution Aqua Varipump 10000 Adjustable Flow Pond Pump (2,640 GPH)

The Evolution Aqua Varipump 10000 (VP10) is a variable-speed submersible and dry-mountable pond pump powered by a whisper-quiet 6-pole, 3-phase motor. With a maximum output of 10,000 LPH (2,642 US GPH) and a maximum head of 3.1m (~10 ft), it is engineered for continuous duty in koi ponds, gravity-fed filtration systems, waterfalls, and water features where precise, adjustable flow control matters. Unlike fixed-output pumps, the VP10’s included digital controller lets you dial in the exact flow your system needs — reducing output for winter months to save energy, stepping up for peak summer circulation, or fine-tuning to match your filter’s ideal throughput. With a 5mm solids-handling capacity and A-rated energy efficiency, it handles real pond conditions without clogging. Backed by Evolution Aqua’s 2-year guarantee. 10,000 LPH / 2,642 US GPH 3.1m / ~10 ft Max Head 75W Max / Variable 6-Pole 3-Phase Motor 5mm Solids Handling Sub + Dry Mount 10m Pump Cable 2-Year Guarantee Key Features & Benefits 🎛️ Digital Variable Flow Control The included digital control box adjusts output and wattage at the push of a button, letting you monitor exact power consumption while matching flow to seasonal needs, filter requirements, or waterfall aesthetics. Reduce winter flow to save energy without stopping circulation. ⚡ 6-Pole, 3-Phase Motor — A-Rated The 6-pole, 3-phase motor delivers smooth, near-silent operation at 75W maximum with A-grade energy efficiency. Three-phase motors run cooler, quieter, and more efficiently at variable speeds than single-phase equivalents — particularly at reduced output settings. 🏗️ Submersible or Dry-Mount Install the VP10 fully submerged in the pond or koi pond, or mount it externally in a dry chamber drawing water via flooded suction — ideal for Evolution Aqua Nexus and EazyPod gravity-fed filtration systems where the pump sits outside the pond. 🛡️ 5mm Solids Handling The VP10 handles solid particles up to 5mm, making it suitable for ponds with fish waste, debris, and grit — not just clean water features. The included strainer cage prevents particles larger than 5mm from entering, protecting the motor while maintaining flow efficiency. 🔌 10m Pump Cable The pump ships pre-wired with a 10m cable from control box to pump, plus a 2m lead from control box to mains. This 12m total reach allows the pump to be placed deep in a pond or in a dry chamber while the controller sits conveniently at the pond edge. 🛑 Dry-Run Protection If the pump detects water loss or a blockage, it automatically shuts down to prevent motor damage. This protection is critical in dry-mount external installations where the pump is separated from the pond water by distance and plumbing. Technical Specifications Specification Value SKU / MFG ID VP10 Max Flow Rate 10,000 LPH / 2,642 US GPH Max Head Height 3.1m (~10 ft) Max Wattage 75W (variable output) Motor Type 6-pole, 3-phase (quiet, efficient) Energy Rating A-grade efficiency Solids Handling 5mm Inlet / Outlet 1.5” / 38mm Hosetail Fittings (included) 25mm (1”) / 32mm (1.25”) / 38mm (1.5”) Dimensions (L × W × H) 267mm × 122mm × 162mm (10.5” × 4.8” × 6.4”) Cable: Control Box to Pump 10 metres Cable: Mains to Control Box 2 metres Total Cable Reach 12 metres (mains to pump) Installation Submersible OR dry-mount (flooded suction required externally) Application Freshwater ponds only Warranty 2-year guarantee (Evolution Aqua) ⚠ Head height note: The Varipump 10000 has a confirmed maximum head height of 3.1m (~10 ft). Plan waterfall and filter installations accordingly — if your filter or waterfall head point is above 3.1m from the pump’s water inlet, the VP10 will not deliver adequate flow. For higher head requirements, consider the Varipump 20000 (VP20, max head 5.5m / ~18 ft). Varipump Family Comparison Model SKU Max Flow Max Head Max Watts Dimensions (L×W×H) Varipump 10000 ← This VP10 2,642 GPH 3.1m (~10 ft) 75W 267×122×162mm Varipump 20000 VP20 5,280 GPH 5.5m (~18 ft) 190W 319×142×181mm Varipump 30000 VP30 ~7,900 GPH higher 450W 370×155×205mm Frequently Asked Questions What is the performance range of the Varipump 10000? The Evolution Aqua Varipump 10000 (VP10) delivers a maximum flow rate of 10,000 LPH (2,642 US GPH) with a maximum head height of 3.1m (~10 feet). The pump’s variable-speed controller lets you reduce output below the maximum to match your filter’s ideal flow rate or your waterfall’s aesthetic appearance, while the digital display shows the exact wattage being consumed at your chosen setting. The pump operates up to 75 watts at maximum output and significantly less at reduced speeds — making it possible to run a pond through winter at a fraction of summer power consumption while still maintaining essential circulation. Can this pump be used in a dry-mount (external) application? Yes. The Varipump 10000 is designed for both submersible and externally dry-mounted installations. When used externally, it must be installed as a flooded-suction system — meaning the pump body must sit below the pond water level so gravity feeds water into the pump inlet. This makes the VP10 particularly well-suited for use with Evolution Aqua Nexus or EazyPod gravity-fed filtration systems, where the pump sits outside the pond in a dry chamber while water flows in from below. The 10m pump cable provides ample reach from an external chamber back to the poolside control box and mains. How does the digital flow controller work? The included digital control box connects between the mains power supply (2m lead) and the pump (10m lead). Using the control panel, you can increase or decrease the pump’s output to match your waterfall flow, filter throughput, or seasonal energy targets. The digital display shows the wattage the pump is currently consuming, giving you direct visibility of running costs. This is particularly useful for winter operation — reduce flow to the minimum needed to keep water circulating and maintain the nitrogen cycle, then increase back to full output when summer feeding and fish activity resumes. What safety protections are built into the motor? The Varipump 10000 is powered by a 6-pole, 3-phase motor with built-in dry-run protection. If the pump detects a loss of water supply or a blockage that restricts flow, it automatically shuts down to prevent the motor from overheating and burning out. This protection is especially important in external dry-mount installations where water supply disruption is possible. The pump also includes a strainer cage that prevents particles larger than 5mm from entering the impeller, protecting against mechanical damage from large debris. Is the Varipump 10000 easy to plumb? Yes. The VP10 features 1.5” (38mm) inlet and outlet ports and includes three stepped hosetail fittings: 25mm (1”), 32mm (1.25”), and 38mm (1.5”). These allow connection to standard kink-free pond tubing in three common sizes without requiring additional adapters. The hosetails are included in the box — no separate purchases needed for basic installation. Why Buy from Pond Pro Direct? Authentic Evolution Aqua products with 2-year guarantee Expert system design support — call or text (765) 508-4352, Mon–Fri 9am–5pm EST Free shipping on all orders Price match guarantee on identical products 30-day return period on eligible items