WalkingPad EVO-UB Weight Bench

Adjustable Weight Bench WalkingPad EVO-UB Weight Bench The EVO-UB is rated to 1,200 lb. That number comes from 1.97 × 2.76 inch steel tubing with a 1.5 mm wall, and it is the reason the bench does not shift under you on a heavy press — the part of a home bench most people only notice once they have outgrown a cheap one. Twelve backrest positions cover decline, flat, and incline, with printed angle markings so you can return to the same setting next week. A plate-loaded leg extension and a preacher curl pad are built into the frame, which keeps arm and leg isolation work on the bench you already own. Weight Capacity 1,200 lb Reinforced steel frame Positions 12 Incline, flat, decline Steel Tubing 1.97" x 2.76" 1.5 mm wall, approx. 16 gauge Assembly 30 min Tools included Plate-loaded leg extension Built-in preacher curl pad Transport wheels built in The Technology Four decisions that separate this from a flat bench. The EVO-UB is built around the frame first, then the two stations that usually cost you a second piece of equipment. 🏗️ 1.97 × 2.76 in Steel Tubing Thickened steel tubing measuring 1.97 × 2.76 inches with a 1.5 mm wall — roughly 16 gauge — carries the 1,200 lb capacity. Frame flex is what makes a bench feel unsafe at the bottom of a press, and heavier tube section is the direct fix for it. 1,200 lb capacity 📐 12-Position Backrest Twelve settings run from decline through flat to incline, so a chest session can move through several angles without leaving the bench. Clear angle markings mean the setting you found for incline press is the setting you get back to next time. Decline · Flat · Incline 🦵 Plate-Loaded Leg Extension The leg extension takes standard weight plates, so resistance scales with the plates already in your gym instead of topping out at a fixed pin stack. The foot anchor uses high-density foam padding, which is what keeps knee and ankle contact tolerable through a long set. Standard plates 💪 Integrated Preacher Curl Pad The preacher curl pad is built into the frame rather than bolted on as an accessory. Bicep isolation happens on the same station as your pressing work, and nothing has to come out of a cupboard first. No extra attachments Why Athletes Choose This One station for pressing, curling, and lower body. ⚖️ 1,200 lb weight capacity Reinforced steel 📐 Twelve angles, decline to incline Angle markings 🦵 Leg extension loads real plates Standard plates 💪 Preacher curl pad built in No attachments 🧎 Padded foot anchor for core work High-density foam 🪑 Multi-layer textured upholstery Comfort under load 🛞 Built-in transport wheels Roll, do not lift 🔧 Assembled in about 30 minutes Tools included Built For Training Where the EVO-UB earns its footprint. Adjustment Twelve positions you can find again Most adjustable benches give you a ladder of holes and leave you guessing which one you used last time. The EVO-UB has 12 positions across decline, flat, and incline, with clear angle markings printed where you can read them from the seat. The adjustment system locks quickly and securely, so moving from flat press to a 30-second set of incline work does not break the rhythm of a superset. 12 adjustable positions: incline, flat, and decline Clear angle markings for repeatable setup Quick, secure locking between positions 12 Positions Angle Markings Arm & Leg Station Isolation work without a second machine Bicep and quad isolation are usually where a home gym runs out of equipment. The EVO-UB combines a preacher curl pad and a plate-loaded leg extension into one frame. The leg extension accepts standard weight plates, so you add load from the plates you already have rather than replacing the station when you get stronger. That keeps preacher curls, leg extensions, glute bridges, and sit-ups on the same footprint as the bench press. Plate-loaded leg extension takes standard weight plates Preacher curl pad built into the frame Supports bench press, glute bridges, sit-ups, and core work All-In-One Plate Loaded The Frame 1,200 lb of capacity, and the tube section behind it A weight rating means nothing without the section it is built from. The EVO-UB uses reinforced steel tubing at 1.97 × 2.76 inches with a 1.5 mm wall, approximately 16 gauge, giving it a 1,200 lb capacity that covers your bodyweight plus everything on the bar. The spec sheet rates it for home gym and light commercial use, which is the honest way of saying it is built for repeated heavy sessions rather than occasional ones. 1.97 × 2.76 in (50 × 70 mm) steel tubing 1.5 mm wall thickness, approximately 16 gauge 1,200 lb capacity; rated for home and light commercial use 1,200 lb Reinforced Steel Comfort & Moving Padding where the load sits, wheels where it does not The upholstery is multi-layer textured material over padding, and the foot anchor uses high-density foam so decline sit-ups and leg work do not end early because of your ankles. When the session is done, built-in transport wheels take the weight — you tilt and roll the bench back against the wall instead of lifting a steel frame across the room. Multi-layer textured upholstery over padding High-density foam foot anchor for knees and ankles Built-in transport wheels for repositioning and storage High-Density Foam Transport Wheels Full Spec Sheet Specifications Frame & Capacity Weight Capacity 1,200 lb Frame Material Reinforced steel Steel Tube Size 1.97 × 2.76 in (50 × 70 mm) Wall Thickness 1.5 mm (approx. 16 gauge) Usage Home gym / light commercial use Dimensions & Weight Product Size 21.8" x 23" x 64.4" (554 x 584 x 1636 mm) Gross Weight 88 lb / 40 kg Adjustment & Setup Adjustable Positions 12 (incline / flat / decline) Angle Markings Yes Assembly Required Yes Tools Included Yes Installation Time 30 minutes Options Accessories Options Basic, Premium Colors Brown, Black Stations Preacher curl pad, plate-loaded leg extension Transport Wheels Yes Questions Frequently Asked Questions How much weight can the bench take? + 1,200 lb total. The frame is reinforced steel using 1.97 × 2.76 in (50 × 70 mm) tubing with a 1.5 mm wall, approximately 16 gauge. The spec sheet rates it for home gym and light commercial use. How many backrest positions does it have? + 12 adjustable positions covering incline, flat, and decline, with clear angle markings so you can repeat a setting exactly. Does the leg extension take weight plates? + Yes. The leg extension is plate loaded and accepts standard weight plates, so you scale resistance with the plates you already own. A high-density foam foot anchor pads the knee and ankle contact. Do I need separate attachments for preacher curls? + No. The preacher curl pad is built into the frame, alongside the leg extension station, so bicep and lower-body isolation happen on the bench itself. How long does assembly take? + About 30 minutes. Assembly is required and the tools you need are included in the box. What options does it come in? + Two accessory configurations — Basic and Premium, the Premium being the leg-developer package — each available in Brown or Black. Assembled, the bench measures 21.8" x 23" x 64.4". What warranty does it come with? + A 1-year warranty, with an optional extension available.