EVO PRO Body Guard Ceramic Bundle

WHY USE EVO PRO Body Spray Guard ProBody is a quick liquid Glass SiO2 spray-on ceramic sealant coating that contains more than 15% SiO2 glass technology. The ProBody attributes high gloss and hydrophobicity to any surface for up to 10 to 12 months!! QUICK LIQUID GLASS SIO2 SPRAY The High hydrophobic effects prevent water, dirt or grime to stick and keep the coated surface clean for a longer period of time. ProBody-SiO2 is the best topcoat to boost up the super high gloss shine and water repellency of the Pro9H/10H ceramic coatings. ProBody-SiO2 can be coated onto any surface, even if Pro9H/10H was not applied before..       Uncoated Gaps When paint is uncoated, debris can sit in pores within the paint.   Coated/ No Gaps Adding layer of protection prevents debris and pollutants to reach paint.   ProBody is a quick liquid Glass SiO2 spray-on ceramic sealant coating that contains more than 15% SiO2 glass technology.The ProBody attributes high gloss and hydrophobicity to any surface for up to 10 to 12 months! ProBody-SiO2 spray features: Very Easy spray-on and wipe-off application Superior High Gloss finish that lasts Excellent UV protection Super Hydrophobic and self cleaning effect Chemical Resistance to detergents and chemicals Highly economic due to high solids percentage Anti stains and water spots Can be coated on any surface Works in conjunction with any existing wax or coating Excellent on rubber and plastic trim The high durability and chemical resistance allows the coating to withstand up to 10-12 months. The High hydrophobic effects prevent water, dirt or grime to stick and keep the coated surface clean for a longer period of time. ProBody-SiO2 is the best topcoat to boost up the super high gloss shine and water repellency of the Pro9H/10H ceramic coatings. ProBody-SiO2 can be coated onto any surface, even if Pro9H/10H was not applied before. Instructions: Applying Method: Hand applied by spray and wipe with clean soft microfiber towel. Shake well before use Do not apply in direct sun Make sure surface is dry and completely clean and free of oil, solvents, surface contamination or wax before applying Apply a 2-3 sprays on the car paint or onto a gloss it microfiber towel. Gently wipe the car surface, Stretch wiping evenly and thinly. Work it into the paint evenly until almost flashed away. After 3-4 minutes, use clean water DAMP gloss it microfiber towel to buff the area until no residue remains. Followed by dry gloss it micro-fiber towel to remove and level any residual ProBody quickly. Check each panel in good lighting to make sure no High or LOW spots remain on surface before moving to next painted surface.