EVO Orange Moderate Cut Foam Pad

WHY USE EVO Orange Moderate Cut Foam Pad Our EVO Moderate Cut Orange Foam Polishing Pad was specifically built to meet the needs of the most demanding detailers, body shops, and even European assembly lines. Ideal for spot-correction and a must-have tool in your paint correction tool arsenal Like all Gloss-It Foam Pads this pad is a pre-polymer. State of the art technology - nothing less! GLOSS-IT EVO POLISHING PADS HOW-TO Recommended Machine: Gloss-It EVO 21 Dual Action Polisher Begin by priming your polishing pad with a light spritz of Gloss-It Gloss Enhancer Detail Spray. Shake EVO Cut Polish 1500 well and apply several pea-sized beads on a color matched EVO Orange Moderate Cut Foam Polishing Pad. Set machine speed on 2-3 to spread polish evenly over surface for coverage and to prevent slinging. Working in a 2’ by 2’ area, increase machine speed to 4 or 5. Working in a 2’ by 2’ area, increase machine speed to 5 or 6. Polish in a cross hatch pattern overlapping with each pass while applying 10 to 15 lbs. of pressure to allow EVO Cut Polish 1500 to effectively remove paint imperfections. Polish area until product is no longer visible and defects are removed. If imperfections persist repeat process until desired results are achieved or step up to the EVO Cut Plus Polish 1000 for more aggressive defect removal. Wipe down surface with a 30/70 solution of Isopropyl Alcohol and distilled water or Gloss-It Gloss Enhancer Detail Spray with a Gloss-It Microfiber Towel to remove residual polish. For true paint correction, check finish in direct sunlight. Once satisfied with correction results, proceed to finishing steps using EVO Cut Finish Polish 2000 with an EVO Yellow Light Cut Foam Polishing Pad then use EVO Ultra Finish Polish 3000 with EVO Blue Final Finishing Foam Pad. Check our our Gloss-It Online Educational Detailing Videos for more in depth information!