EverFlow - EVERSHIELD-303 - 2 Gallon Kit - Polyurethane Coating

EverFlow - EVERSHIELD-303 Polyurethane Coating EVERSHIELD-303 is a two component, 100% solids, odorless, aliphatic polyurethane coating. This product exhibits fast dry time with adequate working time to be applied by brush and roller. It is recommended for areas where a high build coat is desired over colored coatings, vinyl flakes, or quartz broadcast systems. ‣100% solids, odorless, aliphatic polyurethane ‣Fast drying with a work time of 25–30 minutes ‣UV stable, non-yellowing, and gloss-retaining ‣VOC <5 g/L, ultra-low emissions ‣High slip resistance: DCOF 0.99 dry / 0.42 wet ‣Ideal for Decorative Broadcast Systems – Delivers a high-gloss finish over flake, quartz, or epoxy ‣Installer-Friendly – Odorless with manageable working time ‣Maximizes Light Reflectivity – Enhances visibility and space aesthetics ‣Extremely Durable – Excellent abrasion and chemical resistance for high-traffic zones ‣Safe for Indoors – Low odor and VOCs allow application in occupied buildings Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (at least 3 degrees of the dew point). All cracks, holes and irregularities must be repaired with a crack filler prior to applying the coating.