Eurobond D3 Glue, 16 oz

Specially formulated for Click or T&G Glue Floors. CalFlor was the first American manufacturer to introduce a floor adhesive certified to meet the tough European D3 standards for flooring! Reformulated to include NO formaldehyde or acrylamide (common T&G glue additives) and has a certified low VOC content. This improved formula has the same water-resistance, high strength and flexibility of our original D3/Type II Eurobond glue. High strength, flexible cross-linking formula. Flexibility results in a stronger bond. Ideal for wet areas like kitchens and bathrooms One bottle covers 124 – 200 sq ft Low VOC - Formaldehyde and acrylamide free Made in the USA FOR USE ON: Pre-finished Wood, Laminate, Cork and Engineered Flooring! DIRECTIONS:  Laminate: Trim tip opening to 1/16" Wood: Trim tip opening to 1/8" Glue must be applied to entire length of seam. Squeeze a continuous bead of glue onto the top side of the tongue and the bottom of the grove. By Placing glue on the bottom, you are assured of a strong bond. This will also reduce gapping over life of the floor. DO NOT fill in groove as this may result in gapping Assemble planks. Allow 10 - 15 minutes set-up. Using a plastic putty knife, remove excess glue and wipe seam with a damp cloth (keeping cloth clean). Allow to dry for 24 hours before walking on floor. Click here for the SDS Shipping Details Item: GL82114CF UPC: 050462821149 Dimensions: 2½" x 2½" x 9¼"     Weight: 1.33 lbs Carton QTY: 12     Dimensions: 10½" x 8½" x 10"   Weight: 15 lbs Pallet QTY: 960     Cartons: 80    Weight: 1250 lbs