eufyMake E1 UV Printer P1 Air Purifier

eufyMake Purifier P1 — Universal Air Purification for the EufyMake E1 UV Printer, xTool Lasers and other Equipment. Breathe easier while you print. The eufyMake Purifier P1 is the first air purification system engineered for personal UV printers. It captures the TVOCs and odors released during UV ink curing so you can run your EufyMake E1 in enclosed rooms, shared studios, or even at craft fairs without relying on a window or exterior vent. **PLEASE NOTE: To use the air filter with the eufyMake E1 the Exhaust Vent Kit is required,  We offer a bundle which includes the E1 Vent Kit HERE Why the P1 Exists The E1’s built-in filter helps, but open-bed or high-volume printing still releases noticeable odor and VOCs. Generic HEPA units are tuned for dust and pollen. The P1 is tuned for UV ink chemistry. It pulls air from the printer, runs it through a HEPA 13 + high-density carbon stack, and recirculates clean air—no outdoor exhaust required. Key Benefits SGS-certified lab-grade performance: 99.54% TVOC removal and 99.99% PM2.5 removal. Purpose-built 1+6 layer filter: HEPA 13 plus 2.4 kg of modified activated carbon across 6 layers and 8.4 m² of contact area. Smart Auto mode: Syncs with the E1—ramps up when a job starts, continues after printing to clear residual emissions, then drops to standby. Quiet enough for events: As low as 45 dB in Silent mode (gentle rainfall); 55 dB in Strong mode. Works even with the lid open: Effectively captures fumes during open-bed printing. Real-time filter monitoring: App and on-unit reminders so you know when to replace the filter. Wi-Fi + app control: Remote start, mode lock, and automatic speed adjustment based on print type. How It Connects The P1 includes a 1.5 m (4.92 ft) 2-inch exhaust hose with connector. For the cleanest, most balanced airflow it is designed to pair with the E1 via the Exhaust Duct Kit (sold separately). The dedicated duct system routes printer exhaust into the purifier without disrupting print quality or straining the E1’s internal fan. Specifications Air intake: 150 m³/h Fan: 2,120 RPM, 4 modes (Silent / Standard / Strong / Auto) Noise: 45–55 dB Power: 48 W Dimensions: 320 × 387 × 456 mm (12.60 × 15.24 × 17.95 in) Weight: 11.1 kg (24.47 lb) Hose: 1.5 m (4.92 ft) × 2 in diameter Filter life: Silent ~1,700 hrs | Standard ~540 hrs | Strong ~300 hrs What’s Included in the Bundle: P1 Air Purifier Unit Air Filter BONUS: 2nd Air Filter 1.5 m / 2-inch Exhaust Hose with Connector Power Adapter Quick Start Guide Who It’s For Choose the P1 if you print in a small or poorly ventilated room, take the E1 to events or shared spaces, are sensitive to odor, or simply want a plug-and-play solution instead of a DIY vent. If you have easy window or exterior-vent access, the lower-cost Exhaust Fan Kit is the simpler alternative. Available now at Swing Design—your source for genuine eufyMake E1 UV printer accessories, bundles, and expert support.