ESC Cage for the Castle Cobra 8 ESC & ARRMA 6S Vehicles

Our ESC Cage for the Castle Cobra 8 ESC provides a solid, positive mount to keep your valuable ESC in place even under the most extreme circumstances. Check out this list of features built into each RPM ESC Cage: Forget about using adhesives or zip-ties. Bolt in our ESC Cage and never worry again. The ESC can be run with or without a fan. Cooling air channels along the sides improve air movement across the ESC, as a result, naturally lowering ESC temperatures. Simplified Installation and maintenance. Swap the ESC quickly and easily between vehicles. Integrated On / Off switch mount. Rolled cage edge so no sharp edges come into contact with your motor wires. Integrated stock Cable-Tidy Clip mount. Manufactured from our ridiculously tough blend of engineering grade nylons. Backed by our limited lifetime warranty against breakage. Don’t trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you’ve known for decades for bulletproof protection – RPM! Tech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to replace the stock ESC Mounting Plate ARRMA #AR320430. Our ESC Cage works with the following Castle part numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While our ESC Cage will fit a variety of applications, they have been tested on the following ARRMA 6S vehicles in stock form only – Kraton, Mojave, Notorious, Talion, and Typhon that use the #AR320430 stock mounting plate. While the Fireteam uses the same stock mounting plate, space restrictions may prevent our ESC Cage from bolting to the chassis properly.