ER/35 Emulsion Remover

ER/35 is used to remove emulsion from the screen after screen printing. It is concentrated at 1:4. This product is designed for the removal of all photopolymers, diazo and capillary film emulsions. ER/35® is safe on all types of mesh and is drain acceptable to a treatment plant, after soil release, when used as directed. Use concentrated or can be diluted up to 1 part product to 4 parts water. After removal of ink, block out and tape, apply ER/35® to a wet screen (both sides). High-pressure water rinse until all emulsion is gone Screen Care in a nutshell: step one - degrease screen using EnviroClean Screen Degreaser before coating with emulsion step two - after production, clean and remove ink from screen using EnviroWipe Press Wash step three - after ink removal, use The Pink Stuff to remove stains (dehaze), as well as de-grease the screen mesh. step four - remove emulsion stencil using EnviroStrip Emulsion Remover step five - optional.. if screen mesh has tougher stains, use Liquid Renu-it to remove them     Tech Sheet  Safety Sheet