ENVE XC28 Wheelset - 29"

The ENVE XC28 Wheelset — 29" is ENVE's answer to a straightforward question: what happens when you take M Series engineering principles and build them into a carbon wheel at a price that more riders can reach? The XC28 is the product of that effort. Developed alongside the latest M Series lineup and drawing on lessons learned from the proven AM30, it sits in ENVE's Foundation line — a simplified laminate that reduces cost without stripping out the technology that actually determines how a wheel performs under load, on impact, and over thousands of miles of trail use. At 1,516 grams for a complete wheelset — tape and valves included — the XC28 lands at a weight that competes directly with carbon options well above its price point. The rim profile is tuned specifically for the demands of modern cross-country and downcountry riding: 21mm deep for rotational efficiency, 28mm inner width to properly support tires in the 2.25–2.4" range that have become the XC standard. That inner width isn't incidental. Running a 2.4" tire on a 28mm-wide rim produces a rounder casing profile with better support through corners and less sidewall roll under lateral load — the kind of setup that turns a fast-rolling XC tire into something that also works on technical terrain. ENVE optimized the XC28 specifically around this tire size, and it shows in how the rim shoulders interact with the bead. Two patented construction technologies distinguish the XC28 from wheels that simply share a carbon label. ENVE's Wide Hookless Bead addresses one of the recurring frustrations of riding carbon wheels on real trails: impacts. The bead design dissipates energy at the leading edge of the rim rather than transmitting it directly to the tire, reducing the likelihood of pinch flats and the kind of rim damage that ruins rides. The molded spoke holes go further. Where most carbon rims drill through the laminate — severing the continuous fibers that give carbon its strength — ENVE routes the fiber around each spoke hole during the molding process. The result is a spoke hole reinforced by uncut fiber rather than weakened by a drilled void: higher spoke tension is possible, spoke pull-through risk drops substantially, and the wheel maintains accurate truing with significantly less maintenance intervention over time. The InnerDrive Foundation hubs complete the package. ENVE's design positions the 42mm oversized steel ratchet mechanism inboard and over the bearings rather than outboard of them, which reduces the lever arm stress applied to the axle during hard pedaling. Less stress on the axle means less bearing drag and longer bearing life — measurable returns for a wheel that gets used frequently. The ratchet system includes automatic preload adjustment, which removes one of the variables that causes hub performance to degrade over time, and the design is built for straightforward home serviceability when maintenance is eventually needed. Freehub compatibility covers both Shimano Microspline and SRAM XD Driver. Axle options include standard 15x110/12x148 for most XC frames and 15x110/12x157 SuperBoost for downcountry and trail bikes with wider rear spacing. Specs at a Glance Weight: 1,516g complete (tape and valves included) Material: Carbon — ENVE Foundation laminate Rim Depth: 21mm Rim Inner Width: 28mm Optimized Tire Size: 29x2.25–2.4 Max Tire Pressure: 40 psi Tire Compatibility: Tubeless only Spoke Count: 28 front / 28 rear Hub: ENVE InnerDrive Foundation — 42mm ratchet drive system Freehub: Microspline or XD Driver Brake: Centerlock disc Axle Standards: 15x110mm front / 12x148mm or 12x157mm (SuperBoost) rear Construction: Wide Hookless Bead (patent-pending) + Molded Spoke Holes (patented) Design Benefits M Series principles at a Foundation price: The XC28 is built on the same engineering foundations as ENVE's premium M Series — the laminate is simplified to reduce cost, but the construction technologies that determine real-world durability and ride quality are carried over directly. Wide Hookless Bead for impact protection: The patent-pending bead geometry dissipates energy at the rim's leading edge during pothole strikes and trail impacts, reducing pinch flat risk and protecting the rim in the situations where most carbon wheels are most vulnerable. Molded spoke holes for long-term strength: Continuous carbon fiber routed around each spoke hole — rather than drilled through it — supports higher spoke tensions, reduces pull-through risk, and keeps the wheel true with minimal maintenance over the life of the rim. InnerDrive Foundation hubs — engineered for bearing life: Positioning the 42mm ratchet inboard and over the bearings reduces axle stress during hard pedaling efforts, translating directly to less drag and longer bearing service intervals. 28mm inner width with 2.4" optimization: The XC28 is specifically shaped to work with modern XC tire sizing. Running a 2.4" tire on a 28mm-wide rim produces better casing support, improved cornering stability, and a more predictable contact patch than narrower rims allow. SuperBoost compatibility: The 12x157 rear axle option covers downcountry and trail bikes with wider rear spacing — the XC28 isn't limited to pure XC race geometry. Final Take The XC28 is the right wheel for an XC or downcountry rider who wants genuine ENVE carbon construction without moving into M Series territory. The molded spoke holes, Wide Hookless Bead, and InnerDrive Foundation hubs are not compromised versions of better technology — they're the same engineering applied to a simplified laminate. At 1,516 grams with tape and valves for a complete 29" wheelset, the weight is real. At $1,400, so is the value.