ENTREPRENEUHER RHINESTONE TRANSFER

YOU MUST USE A COMMERCIAL HEAT PRESS FOR ALL TRANSFERS SOLD IN THIS STORE. A CRICUT EASY PRESS OR IRON WILL NOT WORK! **This is a Rhinestone Transfer only . You will not receive a garment.** **This transfer can be pressed on any fabric** Heat your press to 330° F Set time to 15 seconds Set pressure to medium cold peel slowly Roll your garment with a fabric roller to remove as much lint as possible. Pre-press the shirt or material for 5 seconds before adding the transfer to remove moisture. Lay the transfer face up with the sticky side on the material. Be EXTREMELY careful with lining up your design as the film is sticky and can cause the rhinestones to move. If the rhinestones move, just lightly place them back into place. These are very delicate transfers and have to be handled gently. Press for 15 seconds with medium to heavy pressure.  Peel the film very slowly to ensure no rhinestones move during the process.  Place butcher paper on top of the transfer & press again for an additional 15 seconds just to ensure the transfer adheres properly. CARE INSTRUCTIONS  Wash item inside out in cold water, do not bleach, do not dry clean, do not iron directly on the design. Tumble dry low. PRINT GODDESS /LSC PRINTS LLC is not responsible for operator or machine error when applying screen print, rhinestone, DTF, puff, or sublimation transfers. We recommend purchasing extra of each transfer and practicing with your machinery, temperatures, pressure, and times before attempting your final product.