Enerzone Solution 3.5 Wood Stove with Blower

Enerzone Solution 3.5 Wood Stove with Blower This extremely large non-catalytic device has sleek, attractive lines: a slightly curved top, side panels with exquisite etched grooves, and a less enormous arched iron entrance with plenty of area for the flames to travel. Feature Fuel Type: Dry cordwood(16" recommmended) Recommended heating area: 1000-2000 sq.ft Maximum burn time: 10 Hours Appliance performance  Fuel type : Dry cordwood (16" recommended) Recommended heating area-ft² : () 1,000 - 2,700 Overall firebox volume-ft³ : 3.5 EPA loading volume-ft³ : 2.88 Maximum burn time : () 10 h Maximum heat output-dry cordwood : (2) 110,000 BTU/h (32.2 kW) Overall heat output rate < : (2) (3) 17,200 BTU/h (5.0 kW) to 57,800 BTU/h (16.9 kW) Average overall efficiency (dry cordwood) : (3) 71 % (HHV) (4) 76 % (LHV) (5) Optimum overall efficiency : (6) (7) 77 % Optimum heat transfer efficiency : (8) 75 % Average particulate emissions rate : (9) 1.6 g/h Average CO : (10) 73 g/h   General features Combustion technology Non-catalytic High-efficiency certified appliance Yes, EPA 2020 approved Maximum log length 22" Log positioning Loading over width and over depth Chimney diameter 6" Flue outlet diameter 6" Type of chimney CAN/ULC S629, UL 103 HT (2100 °F) Minimum chimney height (feet) 15' Baffle type C-Cast or equivalent Approved for an alcove installation Yes Approved for a mobile home installation Yes Shipping Weight 520 lb (236 kg) Door type Single, glass with cast iron frame Glass type Ceramic glass Glass surface – dimensions (Width X Height) 18 3/4" x 12 1/2" Glass air-wash system Yes Premium quality blower included (CFM) 130 Overall dimension (Height) 34 1/8" Overall dimension (Width) 28 1/8" Overall dimension (Depth) 33 1/2" Door opening – dimension (Height) 10 5/8" Door opening - dimension (Width) 19" Firebox – dimension (Height) 12 7/8" Firebox – dimension (Width) 22 7/8" Firebox – dimension (Depth) 20 1/8" Firebox lined with refractory bricks for better heat distribution Yes Stainless-steel secondary-air system improving gas combustion Yes Steel thickness – body 3/16" Steel thickness – top 3/8" USA standard (emissions) EPA Canadian Standard (emissions) CSA B415.1-10 USA standard (safety) UL 1482, UL 737 Canadian standard (safety) ULC-S627 Tested and listed as per applicable standards By an accredited laboratory (CAN/USA) Warranty Limited lifetime   Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm)   Canada United-States   Single wall pipe Double wall pipe Single wall pipe Double wall pipe Clearance – back wall 13 1/4" 7" 13" 7" Clearance - corner 7 1/4" 7" 7 1/4" 7" Clearance – side wall 14" 14" 14" 14" Clearance – top (measured from the platform on which the appliance is installed)** 84" 84" 84" 84" * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.   Installation and Operation manual