Enerzone Solution 2.3-I Wood Insert

Enerzone Solution 2.3-I Wood Insert The Solution 2.3-I includes a typical high-power, heat-activated 120 CFM fan strategically positioned to transfer heat from the firebox into the room. It is intended to suit a face plate that can cover a masonry hearth up to 32 inches (81 cm) high and 50 inches (127 cm) wide. The face plate trimmings, which come in black, brassy gold, and nickel, can be coordinated with the door overlay. Feature Refractory bricks line the firebox to improve heat distribution Efficiency at its peak: 77% Approximately 75,000 BTUs The average particle emission rate is 1.54 g/h. Heating area/ft2 range: 500 - 2,100 Included Blower: Yes What's Included Wood Burning Stove 144 CFM Blower Owner's Manual Appliance performance  Fuel type : Dry cordwood (16" recommended) Recommended heating area-ft² : () 500 - 2,100 Overall firebox volume-ft³ : 2.4 EPA loading volume-ft³ : 1.95 Maximum heat output-dry cordwood : (2) 75,000 BTU/h (22.0 kW) Overall heat output rate < : (2) (3) 14,200 BTU/h (4.16 kW) to 44,500 BTU/h (13.04 kW) Average overall efficiency (dry cordwood) : (3) 72 % (HHV) (4) 77 % (LHV) (5) Optimum overall efficiency : (6) (7) 79 % Optimum heat transfer efficiency : (8) 76 % Average particulate emissions rate : (9) 2.3 g/h Average CO : (10) 69 g/h General features Combustion technology Non-catalytic Maximum burn time 8 h High-efficiency certified appliance Yes, EPA 2020 approved Maximum log length 20" Log positioning Loading over width Chimney diameter 6" Flue outlet diameter 6" Type of chimney CAN/ULC S629, UL 103 HT (2100 °F) Minimum chimney height (feet) 12' Baffle type C-Cast or equivalent Approved for a mobile home installation No Shipping Weight 456 lb (207 kg) Door type Single, glass with cast iron frame Glass type Ceramic glass Glass surface – dimensions (Width X Height) 16 5/8" X 10 5/8" Glass air-wash system Yes Premium quality blower included (CFM) 144 Overall dimension (Height) 22 7/8" Overall dimension (Width) 28 5/8" Overall dimension (Depth) 27" Door opening – dimension (Height) 9 3/4" Door opening - dimension (Width) 17 1/2" Firebox – dimension (Height) 11 7/8" Firebox – dimension (Width) 21" Firebox – dimension (Depth) 16 1/2" Firebox lined with refractory bricks for better heat distribution Yes Stainless-steel secondary-air system improving gas combustion Yes Steel thickness – body 3/16" Steel thickness – top 3/8" Fireplace opening – minimum (Height) 23 3/8" Fireplace opening – minimum (Width) 28 7/8" Fireplace opening – minimum (Depth) 15 3/4" USA standard (emissions) EPA Canadian Standard (emissions) CSA B415.1-10 USA standard (safety) UL 1482, UL 737 Canadian standard (safety) ULC S628 Tested and listed as per applicable standards By an accredited laboratory (CAN/USA) Warranty Limited lifetime   Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm)   Canada United-States Clearance – top (measured from the platform on which the appliance is installed)** 84" 84" Clearance – combustible side mantle to unit 9" 9" Clearance – combustible top mantle to unit 27" 27" Clearance – combustible side wall to unit 16" 16" Clearance - from the top of the unit to the shelf 27" Clearance – from the top of the insert to the shelf 27" * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. Owner's Manual