ENDER 3 / K1C BED

The Ender 3 / K1C bed is machined out of 6.35mm thick 5083 (K100S) Aluminum Cast Tooling plate. We make these beds to order, so please leave 3-5 business days to get them shipped once your order is placed. We check each bed on a granite surface plate to make sure it is within specs for use on your printer. M3 threaded holes have been added for thermal fuses, thermistors, grounding purposes, and leveling. We also have the option to embed magnets it in if you like. In addition, we have had a few requests for a 3 point mount.  So, we have added the option to these beds for 3 point or 4 point mounting! All beds have been checked to be under 0.2mm overall flatness. Our magbeds are a top magnet design bed, meaning that the magnets are slightly below the surface of the magbed.  We are happy to be able to provide some flexplates, with, or without a print surface, called the FireThorns.  Thinner sheets may dimple slightly under the magnet. A lot of China build plates are not up to the challenge.   IMPORTANT NOTE: If at any point you decide to remove the magnets, first of all, when reinstalling the screws, turn the screw backwards until you feel the threads in the screw jump the threads in the bed. Once you feel that little bump, turn the screw in until it gets to the "screw stops turning point" with zero strength behind it. Once the screw has stopped turning, tighten it 1/32nd of a turn and NO MORE. Overtightening WILL shatter the magnets. Weight: 3 lbs (approx) Length: 235mm Height: 235mm Thickness: 6.35mm