EMX5

L, R]  Control and others: FOOT SWITCH : Effect Mute on/off Bus: Stereo: 1, AUX: 2 (Including FX) Input Channel Function          PAD: 30 dB (CH1-4) Hi-Z: Supported (CH4) HPF: 80 Hz, -12 dB/oct. (CH1–3) COMP 1-knob COMP (CH1–4) EQ HIGH: 10 kHz +15 dB / -15 dB (Shelving) EQ MID: 2.5 kHz +15 dB / -15 dB (Peaking) EQ LOW: 100 Hz +15 dB / -15 dB (Shelving) On-board processors:  DSP: SPX Algorithm 24 programs, Feedback suppressor, Master EQ, Monitor EQ On-board amplifiers: Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 630 W + 630 W, 1kHz THD+N less than 1% (CEA2006) : 500 W + 500 W Maximum output power @8ohms      1kHz THD+N less than 10% (CEA2006) : 460 W + 460 W, 1kHz THD+N less than 1% (CEA2006) : 370 W + 370 W Level Meter: 2 × 7 points LED meter (-20, -10, -6, 0, +6, +10, PEAK) Frequency response: Input to SPEAKERS : +1 dB/-3 dB (40 Hz to 20 kHz), Input to STEREO OUT, AUX1 SEND, AUX2 SEND : +0.5 dB/-1 dB (20 Hz to 20 kHz) , refer to the nominal output level @ 1 kHz Total harmonic distortion: Input to SPEAKERS: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) ; Input to STEREO OUT, AUX1 SEND, AUX2 SEND: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz), (THD+N, measured with 22 kHz LPF) Hum & noise level: Equivalent input noise: -117 dBu (Noise is measured with A-weighting filter) Residual output noise Input to SPEAKERS : -66 dBu (40Hz to 20kHz, STEREO MASTER LEVEL: min); Input to STEREO OUT, AUX1 SEND, AUX2 SEND : -80 dBu (20Hz to 20kHz, STEREO MASTER LEVEL: min) (Noise is measured with A-weighting filter) Crosstalk: -85 dB (1 kHz, Measured with 1 kHz band pass filter) Protection circuit: Load protection:  DC-fault Amplifier protection: Over heat protection, Over current protection, Integral power protection Power supply protection: Over heat protection, Over current protection Power requirements: AC 100-240V, 50Hz/60Hz Power consumption: 42 W (Idle) / 210 W (1/8 Power) Dimensions     W: 465 mm (18 5/16") H: 308 mm (12 1/8") D: 325 mm (12 13/16") Net weight: 9.5 kg (20.9 lbs) Accessories: Owner’s Manual, Technical Specifications, AC power cord (2.5 m) Options: Foot switch: FC5, Rack-mount brackets: RK-EMX7