EMX ULT-MVP-2 LOOP DETECTOR

The EMX ULT-MVP-2 is a two-channel, multi-voltage vehicle loop detector from the ULTRALOOP series. It runs two loops from one unit and accepts 12 to 60 VDC or 12 to 240 VAC (48 to 62 Hz), so it does not need to be matched to the operator supply. It plugs into an 11-pin socket or harness (JEDEC B11-88). Each channel has its own SPDT (form C) relay rated 2 A at 30 VDC and 0.5 A at 125 VAC. Each relay can be set for presence, pulse, or Detect-On-Stop (output only after the vehicle stops on the loop). AB logic gives direction of travel across the two loops. The ULTRAMETER display shows the sensitivity setting needed to detect a vehicle on the loop and shows crosstalk. Sensitivity has 10 settings and there are 4 loop frequencies. Other functions: automatic sensitivity boost and normal (5 minute) or infinite presence. Current draw is 25 mA standby and 50 mA in detect. Loop inductance range is 20 to 2000 µH. Size is 2.9 in x 1.2 in x 3.1 in, operating temperature is -40°F to 180°F, enclosure rating IP30. EMX warranty is 2 years. CE compliant. Before You Order Needs an LD-11 DIN rail socket or HAR-11 harness. Neither is included. Two loops are needed to use both channels or AB direction logic. For one loop, the single-channel ULT-MVP uses the same power range and socket.