EMX ULT-PLG LOOP DETECTOR

The EMX ULT-PLG is a single-channel plug-in vehicle loop detector from the ULTRALOOP series. It runs on 12 to 24 VDC, draws 15 mA, and plugs into a gate operator board through a 10-pin female connector. Outputs are solid-state (open collector), not relays. The ULTRAMETER display shows the sensitivity setting needed to detect a vehicle on the loop and shows crosstalk. Sensitivity has 10 settings and there are 4 loop frequencies. Output B can be set for pulse on entry, pulse on exit, loop fault, or same as presence, and an inverted Output B is also provided. Other functions: Detect-On-Stop (output only after the vehicle stops on the loop for 1 to 2 seconds), automatic sensitivity boost, normal (5 minute) or infinite presence, fail-safe or fail-secure, and a frequency count/reset switch. Loop inductance range is 20 to 2000 µH. Size is 3.0 in x 0.9 in x 2.75 in, operating temperature is -40°F to 180°F, and EMX warranty is 2 years. CE compliant. Before You Order Needs a gate operator or controller with a plug-in loop detector port. EMX lists FAAC, All-O-Matic, Chamberlain/Elite, Intelligate, Linear (OSCO), PowerMaster, Rotary Gate Systems, SECOM, Tymetal and Viking Access. Check your operator manual for the port. Power is 12 to 24 VDC from the operator. It does not take AC power. Does not use the HAR-11 harness or LD-11 socket. A loop is required, such as an EMX PR Lite preformed loop or saw-cut loop wire.