Asphalt Emulsion Tack Coat

Product Description Pavemade Asphalt Emulsion Tack Coat is an anionic emulsion that is used for various purposes, including as a primer, damp-proofing, or as a tack coat. Asphalt Emulsion Tack Coat is manufactured to meet the specifications outlined in AASHTO M208, as well as any state specific requirements. Application and Coverage: Depending on the surface being covered, Asphalt Emulsion Tack Coat can be applied with a brush, squeegee, or spray equipment and provides coverage of 150 square feet per gallon. The maximum temperature allowable for application for Asphalt Emulsion Tack Coat is 175°F. Storage and Limitations: Optimal storage for Asphalt Emulsion Tack Coat is in a heated tank equipped with an agitator at a temperature below 160°F. Do not allow Asphalt Emulsion Tack Coat to freeze. Avoid extreme overheating of Asphalt Emulsion Tack Coat. Avoid using high shear pumps, especially when the emulsion is at ambient temperature.  Composition and Safety: For complete safety information please review the Safety Data Sheet for this product. Product Specifications  Specification Minimum Maximum Viscosity, seconds (T72) 20 100 Sieve Test, % (T59) 0.00 0.20 Residue by Distillation, % (T59) 57 - Oil Distillate, % (T59) 0 3 Penetration (T49) 40 90   Storage Temperature: 160°F Maximum Application Temperature: Varies on Use Solids: 57% Density: 8.3 to 8.5 pounds/gallon