EMP Shield Home Protection

We are an authorized reseller of EMP Shield products, designed to protect homes, vehicles, and critical systems from EMPs, solar flares, lightning strikes, and power surges. While we are not the manufacturer, we proudly represent EMP Shield products and provide support to customers seeking these preventative solutions. DESCRIPTION SPECS USAGE EMP SHIELD HOME PROTECTION - The Ultimate Defense for Your Home's Electrical System Protect your home from the devastating effects of an electromagnetic pulse (EMP), coronal mass ejection (CME), lightning strikes, and power surges with the EMP Shield Home Protection device. Designed for seamless integration into your home's electrical panel, EMP Shield Home Protection ensures your entire electrical system remains intact during high-energy events. Whether your breaker box is flush-mounted (installed within the wall) or surface-mounted (extending from the wall), we offer the right model to fit your setup. SKU: SP-120-420-W (Surface-Mounted Panel Version) Ideal for breaker boxes extending outward from the wall. Single phase, 120/240V, wired. SKU: SP-120-420-RL Concealed Model (Flush-Mounted Panel Version) Designed for electrical panels installed within the wall. Single phase, 120/240V, remote LED. UNMATCHED PROTECTION & RELIABILITY Complete Home Coverage – Instantly detects and shunts excess energy, preventing damage to your electrical system and connected devices. Unparalleled Strength – Withstands up to 228,000 amps per phase, offering industry-leading surge protection. Rigorously Tested & Certified – Meets various military standards including MIL-STD-188-125-1 (EMP protection). IP 66 Rated - For use in extreme hot and cold climate conditions. Simple Installation – Easily connects to your breaker panel in minutes, providing continuous protection. Installation guide provided. Backed by a $25,000 Insurance Policy – If the device doesn’t protect your electronics, EMP Shield covers the damage. 10-Year Warranty – Built to last with long-term reliability and industry-leading coverage. If it fails at anytime during the warranty, EMP Shield replaces it for $50. Made in USA TESTING CERTIFICATIONS EMP Shield has been rigorously tested at the Keystone Compliance facility which is a federally approved testing facility that is used to conduct many of today's most advanced and comprehensive technological tests. The testing and evaluations conducted at the facility were documented in depth to show the true ability and durability of the EMP Shield. EMP Shield has been designed to exceed the US Military requirements for protection against a high-altitude nuclear detonation that results in an electromagnetic pulse. This family of products has been tested to verify compliance with the following Military Standards: MIL-STD-461-RS105 - Transient electromagnetic pulse of up to 50 kV/m, double exponential wave with a rise time in the nanosecond range, that is applied to the equipment under test (EUT) at least 5 times. Tested at 50 kV/m and also 90 kV/m (80% above required testing voltage). MIL-STD-188-125-1 - High altitude electromagnetic pulse. MIL-STD-461G - Control of electromagnetic interference. MIL-STD-461-CS-115 - The purpose of CS115 is to test an electronic or electrical system to withstand signals coupled onto the test unit’s associated cabling. The test unit will be subjected to rise and fall times, pulse width, and amplitude at a 30 Hz rate for one minute. MIL-STD-461-CS116 - Applies to 10 kHz to 100 MHz for all interconnecting cables, including power cables, and individual high side power leads. MIL-STD-461 CS117 - Applies to all safety-critical equipment interconnecting cables and non-safety critical equipment with interconnecting cables/electrical interfaces that are part of or connected to equipment performing safety critical functions. The goal is to test the unit’s ability to withstand lightning transients coupled onto the test unit’s associated cables and power leads. MIL-STD-464C - Electromagnetic environmental effects requirements for systems. VIEW FULL TEST RESULTS Electromagnetic Pulse Protection All Phases of an EMP (E1, E2, E3) Coronal Mass Ejection & Solar Flare Protection Up to 228,000 Amps Lightning Protection 100% Lightning Guarantee Backed By a $25,000 Insurance Policy Be prepared for the unexpected. Invest in EMP Shield Home Protection to ensure your home's electrical system stays operational during electromagnetic, solar, and power surge crises. INSTALLATION VIDEO Watch the installation video to understand the setup requirements and ensure proper installation. HOW DOES EMP SHIELD WORK? EMP Shield will protect all the electronics and equipment connected to your electrical system. This is accomplished by shunting (shorting) the over voltage coming in from the grid and the induced voltage that is collected within your home. Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the EMP Shield will see the surge and protect your electrical system. The technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly quickly, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. This new technology is referred to as SightSpeed™. ADDITIONAL EMP SHIELD OPTIONS In addition to home protection, EMP Shield offers a variety of defense solutions for vehicles, generators, solar systems, RVs, and portable electronics. No matter your setup, there’s an EMP Shield device to keep your critical systems operational and protected from EMPs and power surges. Contact us for a full list of EMP Shield products including international options. EMP SHIELD COLLECTION Sold out Sold out Sold out