Emlid Reach RX2

Emlid Reach RX2 is a compact, network-rover GNSS receiver that brings IMU tilt compensation, an all-band, 672-channel engine, and centimeter-level RTK to everyday fieldwork. It’s built for teams that need high-precision coordinates without wrestling with complex setup, integrates cleanly with Emlid Flow as well as popular GIS apps, and is rugged enough for year-round use. IMU Tilt Compensation, Done Right Measure Accurately without Leveling Capture points with a tilted pole while maintaining RTK precision. Typical specification: RTK + 2 mm + 0.3 mm/° of tilt error. That means fast, reliable shots near walls, slopes, or tight spaces where bubble leveling slows you down. Immune to Magnetic Interference The RX2’s IMU does not rely on a magnetometer, so measurements stay stable around vehicles, steel structures, and electronics. No User Calibration Each RX2 is factory-calibrated. On site, initialization takes only 7 to 10 seconds with a quick rotate, then you’re ready to survey. Secure Quick-Release Mount A purpose-built thread and adapter lock the receiver to the survey pole to prevent backlash during tilt, preserving accuracy. All-Band, Multi-Constellation GNSS 672 Channels for reliable Fixes Tracks GPS, GLONASS, Galileo, BeiDou, QZSS, and NavIC, including modern signals such as GPS L5 and BeiDou-3. The new GNSS antenna improves reception for challenging environments, including light canopy and urban clutter. RTK via NTRIP Connect to any CORS or correction service using RTCM3 over NTRIP to get centimeter-level results with minimal setup. Planned SSR Options Future firmware will enable L-band/SSR services such as Galileo HAS for decimeter-class positioning (about 2 to 8 inches), useful when RTK corrections are unavailable. Note: RX2 is a rover only. It cannot act as a base and does not log raw data for PPK. Pocket-Sized, Field-Ready Lightweight and Compact Approx. 280 g (0.62 lb) with a slim profile that fits in a jacket pocket or glove compartment. Ruggedized for Real Work IP68 protection, water resistant to 1.5 m (4.9 ft) for up to 30 minutes. Operating range −20 to +65 °C (−4 to 149 °F). All-Day Battery Up to 16 hours on a single charge; top up via USB-C in under 3 hours. High-capacity Li-ion 7000 mAh (25.2 Wh) chemistry handles heat and cold well. Works the Way Your Team Works Emlid Flow Keeps Field and Office in Sync The Emlid Flow mobile app pairs instantly over Bluetooth for collector setup, linework, coding, stakeout, and QA checks. Projects and code lists sync with the Emlid Flow 360 cloud so teams always work from the latest data. iOS and Android Friendly MFi-certified for seamless use on iPhone and iPad, and fully compatible with Android devices. Use RX2 directly with apps your team already knows. Plays Nicely with GIS Integrates with ArcGIS Field Maps, Survey123, QuickCapture, QField, Mergin Maps, and more to lift sub-meter workflows into the centimeter class without retooling your stack. Emlid Corrections Powered by Point One Navigation, Emlid Corrections, is a VRS RTK correction service built into Emlid receivers. It delivers 1-2 cm horizontal and vertical accuracy over the internet, no base station required, no NTRIP configuration needed.  The service is activated directly in Emlid Flow — either by claiming the included free year, or by entering a purchased license key.* Compatible devices: Reach RX2, RS4, RS4 Pro, RS3, RX, RS2, RS2+  *Emlid Corrections is activated through Emlid Flow — either by claiming the included free year, or by entering a license key. Once active, corrections are delivered automatically with no manual NTRIP setup. Each license is tied to a single device and is non-transferable. The license is global — it covers all regions currently supported by the network, including any future expansions. The service is currently available in US, Europe, Australia, New Zealand and many other countries. Review the coverage map for more supported regions.  Where Reach RX2 Delivers Value GIS and Esri Ecosystem Boost positional accuracy for asset inventories, environmental mapping, and inspections while staying inside ArcGIS Field Maps, Survey123, or QuickCapture. MFi support ensures smooth performance on iOS-based fleets. Utilities Capture points in trenches and hard-to-reach corridors with tilt, then verify clearances, offsets, and as-builts. Pair RX2 with terrestrial scanning apps to estimate volumes and track progress. Construction Equip non-survey staff to stake fences, check elevations, lay out site features, and collect control or checkpoints. Simple operation reduces training time and error rates across growing teams. Landscaping Produce quick topography, layout designs, and validate grades with centimeter precision. Emlid Flow’s CAD-aware tools streamline field capture to office deliverables. Terrestrial Scanning Use RX2 with PIX4Dcatch and similar apps to geo-reference 3D captures of buildings, facades, and constrained spaces for utility mapping, volume calculations, and as-built documentation. In the Box Reach RX2 (Standard) (1) Reach RX2 (1) USB-C cable Pix4D & Emlid Scanning Kit (1) Reach RX2 (1) USB-C cable (1) Pix4Dcatch 1-year license (1) Emlid Scanning Kit:   • Emlid handle   • Leash   • Allen key 3 mm   • Carrying case (1) Free Year of Emlid Corrections Specs Emlid Reach RX2 Specifications Mechanical Dimensions 172 × 51 × 51 mm (6.77 × 2.00 × 2.00 in) Mount 5/8"-11 UNC and quick-release Weight 280 g (0.62 lb) Operating Temperature −20 to +65 °C (−4 to 149 °F) Ingress Protection IP68 (water resistant to 1.5 m / 4.9 ft for up to 30 min) Electrical Autonomy Up to 16 hrs Battery Li-ion 7000 mAh, 3.6 V, 25.2 Wh Charging USB Type-C, 5 V 2 A Certification FCC, CE, IC, MFi Positioning RTK H: 7 mm + 1 ppm V: 14 mm + 1 ppm Tilt accuracy RTK + 2 mm + 0.3 mm/° Convergence time ~5 s typically Update rate 5 Hz Connectivity Communication interface Bluetooth 4.2 (BR/EDR + LE) Ports USB Type-C Data Input data format RTCM3 Input data protocol NTRIP Position data format NMEA GNSS Signals tracked GPS: L1C/A, L2C, L5 GLONASS: L1OF, L2OF Galileo: E1-B/C, E5a, E6 BeiDou: B1I, B1C, B2a, B3I QZSS: L1C/A, L1C/B11, L2C, L5 NavIC: L1-SPS Data, L5-SPS Number of channels 672