
$2,699.00
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
The Emlid Reach RS2+ is a high-precision, multi-band RTK GNSS receiver designed for surveying, mapping, and navigation. Offering centimeter accuracy in less than a second, it operates in any environment, with 22 hours of battery life and a rugged, water-resistant design. Gets a Fix in Seconds Reach RS2+ gets a fixed solution in just seconds and maintains robust performance even in challenging conditions. Centimeter accuracy can be achieved on distances up to 60 km in RTK, and 100 km in PPK mode. GPS/QZSS, GLONASS, BeiDou, and Galileo L1C/A, L2C, L1OF, L2OF, B1I, B2I, E1B/C, E5b PPP Support Record raw positioning data in the RINEX format for further post-processing. RINEX logs are compatible with OPUS, AUSPOS, and PPP services, so you can get cm-precise results anywhere on Earth. For post-processing, you can use the free PPK software Emlid Studio. Built-in LTE Modem Reach RS2+ features a power-efficient LTE modem with 2G/3G fallback and global coverage. Now corrections can be accessed or broadcasted over NTRIP independently, without relying on an internet connection on your phone. 22 Hours on 1 Charge Up to 22 hours of autonomous work when logging data and up to 16 hours as an LTE rover, even in cold weather—no more need to carry spare batteries with you. Reach RS2+ can charge from a USB wall charger or a power bank over USB-C. Survey with Emlid Flow and manage data with Emlid Flow 360 Emlid Flow is a mobile app for iOS and Android. It handles all the fieldwork—receiver settings, data collection, coding, linework, and stakeout. All survey data is in sync with the cloud-based service Emlid Flow 360, which allows you to access your projects from your browser and manage survey data and code lists. Collect and stake out points Use any coordinate system you need To create a project for data collection, choose your coordinate system from the library or enter its parameters manually. The app supports thousands of coordinate systems, projections, grids, and geoids. In the stakeout mode, the app displays East-North and straight-to-line distances and supports cut and fill indications. A close-up alignment mode helps you to center precisely above the point. Coordinate systems based on WGS84, NAD83, GDA2020, and others Collect and Stake out Lines Create linework on the go, start new lines, and continue collecting existing ones You can either use predefined geometry types or a full-blown code library. The linework is displayed right away, so you can always see how your project is progressing. During the stakeout, you can easily navigate to a line, and stake it out with an offset and with a chainage. Coding Quickly switch between different object codes as the whole library is at your fingertips at all times To measure and describe objects, upload your custom code library or use a built-in one with more than a hundred codes. Easily create new codes on the fly right in your survey project. Work with Different Background Maps To measure and describe objects, upload your custom code library or use a built-in one with more than a hundred codes. Easily create new codes on the fly right in your survey project. Manage your Projects in the Cloud The Emlid Flow app is synchronized with the Emlid Flow 360 service. This allows you to create and access survey projects, manage coordinate systems, and export and import data using both the mobile app and the cloud service at flow360.emlid.com. Export and import formats CSV, DXF, and Shapefile Manage your Code Libraries Import your code library to Emlid Flow 360, and it is immediately available for your projects inside the Emlid Flow mobile app. No need to check if the latest version is on the collector, as it all syncs automatically. Connectivity Real-Time Position Streaming in NMEA Reach provides data in standard NMEA that is used by most survey and GIS apps. Simply connect your device to Reach over Bluetooth or with a cable, and turn on “Position output” in Emlid Flow. Reach Can Turn On and Off Automatically Reach is able to turn on and off in sync with an external battery connected over RS-232. This helps when the power button is hard to reach. For example, if the receiver is placed on the roof of a tractor. Compatible Apps FieldGenius for Android, ESRI Collector, QField and others Position Streaming Interfaces RS-232, TCP, Bluetooth NTRIP or another Reach as a Base Station Reach RS2+ needs a base station as a source of corrections. That’s a requirement for centimeter precision in RTK and PPK. Base might be either another Reach RS2+ receiver or an NTRIP service. VRS is also supported. Reach RS2+ works seamlessly with other Reach receivers over any link. Input and Output Corrections Interfaces TCP, LoRa, Bluetooth, RS-232, NTRIP Formats RTCM3 Input and Output Corrections Over 60 km in RTK 100 km in PPK Any place on Earth with PPP Emlid Corrections Powered by Point One Navigation, Emlid Corrections, is a VRS RTK correction service built into Emlid receivers. It delivers 1-2 cm horizontal and vertical accuracy over the internet, no base station required, nn NTRIP configuration needed. The service is activated directly in Emlid Flow — either by claiming the included free year, or by entering a purchased license key.* Compatible devices: Reach RX2, RS4, RS4 Pro, RS3, RX, RS2, RS2+ *Emlid Corrections is activated through Emlid Flow — either by claiming the included free year, or by entering a license key. Once active, corrections are delivered automatically with no manual NTRIP setup. Each license is tied to a single device and is non-transferable. The license is global — it covers all regions currently supported by the network, including any future expansions. The service is currently available in US, Europe, Australia, New Zealand and many other countries. Review the coverage map for more supported regions. Engineered to be Tough Reach RS2+ is designed to work even in the most challenging environments. IP67 RS2+ is waterproof up to 1 m depth. All connectors are completely sealed and protected from water and dust with silicone plugs. -20 to +65 ºС We extensively tested Reach RS2+ in conditions that simulate coldest winters and hottest summers. Polycarbonate body Polycarbonate, an extremely durable material that is used in bulletproof glass, makes Reach RS2+ impact-resistant. Covered with Elastomer This is a rubber-like material that forms a shock absorber around the whole device. In a sophisticated manufacturing process, elastomer is permanently bonded to the polycarboante base so that if your bipod falls over, Reach RS2+ will bump off with no marks left. LoRa Radio 868/915 MHz Frequency range Up to 8 km At only 100 mW 300% more range Compared with FSK radios at the same power LoRa Spread Spectrum modulation can work on distances up to 4 times longer compared with traditional FSK radios at the same power output. This gives Reach RS2+ robust radio performance without sacrificing battery life. LoRa radio is used to connect rover to base when Internet-delivered corrections are not available. Industrial Battery 868/915 MHzLiFePO4 Industrial battery that handles both high and low temperatures well. USB-C Reach RS2+ charges from any USB port and power bank. 2 000+ cycles of charging and discharging while maintaining original capacity. Reach RS2+ works for up to 22 hours in static logging and up to 16 hours in RTK with cellular on. You don't need to worry about having spare batteries or replacing them in the field. Hot-swaps are a thing of the past. Compact and lightweight 126 х 142 mm Fits in a small bag 950 g Weighs less than a typical survey pole Comes with a LoRa antenna, USB cable, and a carrying case with a strap Which Emlid Receiver Should I Choose? Specs Emlid Reach RS2+ Specifications Mechanical Dimensions 126 x 126 x 142 mm Weight 950 g Operating Temperature -20 to +65 ºC Ingress protection IP67 Electrical Autonomy 16 hrs as LTE RTK rover, 22 hrs logging Battery LiFePO4 6400 mAh, 6.4 V External power input 6–40 V Charging USB Type-C 5 V, 3 A In The Box Certification FCC, CE Positioning Static H: 4 mm + 0.5 ppm V: 8 mm + 1 ppm PPK H: 5 mm + 0.5 ppm V: 10 mm + 1 ppm RTK H: 7 mm + 1 ppm V: 14 mm + 1 ppm Convergence time ~5 s typically Connectivity Lora Radio Frequency range: 868/915 MHz Power: 0.1 W Distance: Up to 8 km LTE modem Regions: Global Bands: FDD-LTE: 1,2,3,4,5,7, 8, 12, 13, 18, 19, 20, 26, 28, 66 TD-LTE: 38,40,41 UMTS (WCDMA/FDD): 1,3,2,4,5,6, 8,19 Quad-band, 850/1900, 900/1800 MHz SIM card: Nano-SIM Wi-Fi 802.11 b/g/n Bluetooth 4.0/2.1 EDR Ports RS-232, USB Type-C Data Corrections NTRIP, RTCM3 Position output NMEA, LLH/XYZ Data logging RINEX Internal storage 16 GB 160+ days of logging at 1 H GNSS Signal tracked GPS/QZSS L1C/A, L2C GLONASS L1OF, L2OF BeiDou B1I, B2I Galileo E1B/C, E5b Number of channels 184 Update rates up to 10 Hz Videos Introducing Reach RS2+ with an LTE modem How RTK Works In the Box (1) Reach RS2+ (1) LoRa Antenna (1) USB Cable (1) Carrying Case with Strap (1) Free Year of Emlid Corrections
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$2,699.00