Element RC Knightrunner Rock Sliders w/ Skids

Element RC Enduro Knightrunner Rock Sliders w/ Skid Plates Steel Frame-mounted Rock Sliders w/ Skid Plates for mounting electronics, etc The receiver box and ESC will either need to be relocated or attached to our skid plates option, which we highly recommend. ALL NEW Body Capture Bar Option available! Our Body Capture Bar supports the lexan body for full protection to help keep the body from caving in or tearing! (All pictures depict this option- a solid rod behind the main Rock Slider Bar with enough space for the body to fit between the two) Specifications: * 165mm length x 55mm offset (Cab-only option for Sendero available HERE if eliminating the stock rear bed- length of sliders in rear is shortened) * Built in front and rear link riser mounts * Mounts using existing holes in frame (hardware not included) * Steel construction - Hand Made/Welded. **Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below: -Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own, -Flat Black: not as susceptible to chips -Rustoleum Truck Bed Coating: Superficial coating - chips easily, but is easier to touch up using a can of Rustoleum Truck Bed Coating, available here: HERE Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. *Recommend hardware mounting kits available at the top of the page as an optional add-on.**