ElectraPix Bar 8 Pak

The ElectraPix Bar 8 Pak features six (6) ElectraPix Bar 8 Battery powered, wireless DMX LED linear fixtures housed in a robust road case with dedicated charging slots for each fixture. It is supplied with an ADJ UC-IR24 remote control that allows simple color selection as well as a power cable which plugs into the side of the case for in-case charging. Specifications ElectraPix Bar 8 Pak Includes: (6) ElectraPix Bar 8 Pak (Fixtures) (1) ElectraPix Bar 8 FC (Flight Case) (6) ElectraPix Bar 8 IPCB (Charging bases and power supplies) (1) UC-IR24 Wireless Infrared Controller (6) IP65 Locking Power Cable ElectraPix Bar 8 Pak Features: Houses / Transports and Charges (6) ElectraPix Bar 8™ fixtures ElectraPix Bar 8 Pak Dimensions / Weight (loaded case with 6 fixtures): Length: 31.8” (807.5mm) Width: 27.42” (696.4mm) Vertical Height: 17.4” (441.9mm) Loaded Weight: 174 lbs. (79 kg) Flight Case Electrical / Thermal: Power Input: AC100VAC~240VAC, 50/60Hz IP65 Power Locking Input and Output Max Power Consumption: 400 Watts Power Draw: 4A @120Vac., 2A @230VAC. Charge status indicator 14°F to 113°F (-10°C to 45°C) ELECTRAPIX BAR 8 FIXTURE SPECIFICATIONS: Features: 8 Pixel, Hex Color LED (RGBAL+UV) LED Bar Battery or Wall Powered Up to 20 Hour Battery Operation Battery Operation (Menu Option) Individual Pixel Control Built-In Foreground LED Programs Built-In Background LED Programs Variable White Color Temperature Control (2,300K ~ 9,900K) English Spanish User Menu Built-In Alarm Color Calibrated LED's User Selectable LED Refresh Rates (900Hz ~ 25K) 6 User Selectable Dim Modes 4 User Selectable Dim Curves Electronic Strobe (0.3Hz ~ 11Hz) Electronic Dimming Attach up to four (4) ElectraPix Bar 8 to the Accu Stand VFB1 vertical floor base Source: (8) 20W Hex Color RGBAL+UV Foreground LED's (32) 0.2W RGB Background LED's 50,000 Hour Average Life* *May vary depending on several factors including but not limited to: Environmental Conditions, Power/Voltage, Usage Patterns (On-Off Cycling), Control, and Dimming. Optical: 2,300K ~ 9,900K White Color Temperature Range 17° Beam Angle 45mm Lens Diameter x8 Physical: IP65 Housing OLED Digital display L Track system for locking accessories / rigging Glare Shield Diffusion Filter slot Angle adjustable feet Horizontal slide lock to attach additional ElectraPix Bar 8 or ElectraPix Bar 16 Control: DMX512 Aria X2 Wireless Management / DMX System Bluetooth RDM and RDM Net Compatible IR (Includes UCIR24 wireless remote) (9) DMX Channel Modes (5, 6, 9, 13, 22, 24, 48, 52 66 Channel modes) On-board Manual Control Mode Primary / Secondary Mode Connections: 5pin XLR Outdoor DMX In/Out Sockets (Must be used with STRxxx, 5pin DMX cables to create IP65 seal) Outdoor Locking Power Sockets Battery Charging Socket Dimensions Weight: Length: 3.72” (94.5mm) Width: 23.1” (586.7mm) Height: 10.6” (268.7mm) Weight: 16.1 lbs. (7.3 kg) Power: AC100-240V/50Hz-60Hz Input 60W Power Consumption Link 15 pieces @120VAC or 28 pieces @ 230VAC Battery: Rechargeable Lithium ion Battery Capacity: 7,000mAh Battery Voltage: 22.2V Charge Time, AC Power: 5 Hours (To Full) Charge Time, Flight Case: 5 Hours (To Full) Up to 20 Hour Battery Operation Battery Cycles: 500 Thermal: Ambient Operational Temperature: -4°F to 113°F (-20°C to 45°C) Storage Temperature: -22°F to 113°F (-30°C to 45°C) Certifications IP Rating: CE cETLus (Control # 4002034) FCC IP65 Included Accessories: (1) Outdoor Locking Power Cable (1) UCIR24 Remote (1) 20° Diffusion Filter Optional Accessories: Accu Stand VFB1 (Floor Base) LTrack A2 (LTrack Adapter Only) LTrack CA2 (LTrack Adapter with Narrow Clamp) EPIX B816 IPCB: replacement charging base and power supply Specifications and documentation subject to change without notice.