E&H # 770-3FRD Pressure Sensitive Insulation Cover Splicing Tape

E&H # 770-3FRD Tedlar Insulation Blanket Splicing Tape (METALIZED) Pressure Sensitive Insulation Cover Splicing Tape Primarily used in the fabrication of insulation blanket covers and for the installation of insulation blankets. It may be used for sealing sewn seams and for closing fabrication slits or holes around brackets, conduits or other objects that may exist after installation. Compatible with Orcon OT-16A E&H Laminating brand #770-3FRD Dull Gray Polyvinyl Fluoride Insulation Cover Splicing Tape; meets: DMS 1984 Rev. P Type 6 Class 2 Documentation:  Factory C of C to DMS 1984 and Burn Test Cert   Lead Time:  The factory has new rolls in stock and can ship to us the same day that we send them our purchase order.  We will typically receive the shipment four calendar days later.   800PEEL STRENGTH PSTC-1 (ASTM D 3330):  15 Min                       54.4 oz/inch average 3 Day                        129.6 oz/inch average 30 Day                      152.3 oz/inch average   TENSILE STRENGTH PSTC-31   ENGLIGH                                       METRIC           23.6 lbs. / 1" width average             105.02N / 25mm average   WEIGHT: 4.5 +/- .3oz/square yard FLAMMABILITY 12 SECOND VERTICAL BURN:   Burn Length              3.4 inches maximum Flame Time               0 Seconds Drip Flame Time        No Drips   SHELF LIFE: Minimum of 12 months in cool, dry storage   PASSES SPECIFICATIONS: DMS-1984 Rev. P Type 6 Class 2 FAA Radiant heat Panel FAR 25.856 (A) FAR PART 25.853 (A,B) DMS-1511 12 second vertical burn BSS-7230 12 second vertical burn   770-3FRD Tech Data Sheet         Additional Information   Nominal Tape Widths vs Actual Widths Tape rolls are cut to standard tape industry metric widths of approx. 24mm per 1-inch of nominal width ordered. As a result ACTUAL tape widths are normally 5% narrower than the NOMINAL width shown in inches. Examples: 1" Nominal width = 15/16" (24mm) Actual width 2" Nominal width = 1-7/8" (48mm) Actual width 3" Nominal width = 2-13/16" (72mm) Actual width Note that tape rolls are NOT guaranteed to be splice-free.