EDM-830 Upgrade

Indicator Only - Functions with Existing Probes & Options Note 1: Core charge of $300 will be automatically added to order. Core charge is refunded once valid core is returned to JPI (manufacturer). All cores must be sent direct to JPI. Note 2: EDM 730/830 fits in a 3-1/8" hole and is not a direct slide in for the EDM 700/800 2-1/4" units. This upgrade program will allow you to swap out your 700 to the new 730 or 800 to the new 830 as the new 730 and 830 use a standard 3-1/8" mounting hole. The 730/830 will use the same JPI probes and will better display engine parameters with this plug and play upgrade. LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate Voltage, For alternator failure, monitored for over and under voltage with alarms Pilot Programmable Hi & Lo alarm limits. ALL programming from front panel All EDM’s TSO’d for quality with a 3 yr. Warranty on the Electronics Quick response probes, fastest accurate readings, pre-made harness and hardware Data Memory, reading once every 2 to 255 seconds EZPlot-1 program for plotting and downloading data USB download port built in with memory stick (730/830/790/900 Only) Full color TFT screen 4 inches Diagonal (730/830/790/900 Only)