EDI LMA 1250S-LV Fail Secure Loop Detector Low Voltage - 12-24VAC/DC

The EDI LMA-1250S-LV is a single channel DEFLECTOMETER loop detector with two relay outputs and a rear 11-pin male Amphenol connector (86CP11). It runs on 12 VDC, 24 VDC or 24 VAC (10 to 40 VDC or 14 to 35 VAC). The housing is 2.875 x 1.375 x 3.0625 in. The 7-segment DEFLECTOMETER display reads out the detection level, so sensitivity can be set to pick up all vehicles, including motorcycles. It also shows loop frequency and fault codes. Output A runs Limited or Infinite Presence. Output B gives a 250 ms pulse on entry or exit, duplicates Output A, or signals a fault. There are 10 sensitivity levels, four loop frequencies, a 2 second delay and 2, 5 or 10 second extension. Relays are rated 5 A. Loop inductance range is 20 to 2500 µH. It operates from -30°F to 165°F. Before You Order Fail-secure (S) version: the outputs do not go to detect on a loop fault or power loss. Never use a fail-secure detector on a safety loop. The fail-safe LMA-1250-LV is the version for safety loops. Wires with a standard 11-pin harness or socket base.