EDI LMA-1250-LP Loop Detector ***Discontinued - Unavailable***

Discontinued by EDI. The LMA-1250-LP is a low power version of the LMA-1250 DEFLECTOMETER loop detector, for battery or solar powered gates. It runs on 10 to 40 VDC (12 or 24 VDC nominal) and draws about 4 mA at 12 VDC with no vehicle and the display off. It has two relay outputs and a rear 11-pin male Amphenol connector (86CP11). The housing is 2.875 x 1.375 x 3.0625 in. Output A runs Limited or Infinite Presence with 0, 2, 5 or 10 second extension, and is set for fail-safe or fail-secure. Output B gives a 250 ms pulse on entry or exit, duplicates Output A, or turns on during a loop fault. The DEFLECTOMETER display, 10 sensitivity levels, four loop frequencies, 2 second delay and non-volatile fault memory carry over from the LMA-1250. Relays are rated 5 A. Loop inductance range is 20 to 2500 µH. It operates from -30°F to 165°F. Before You Order No longer made. EDI does not name a direct replacement. DC only. EDI notes its performance differs from the standard LMA-1250; use it only where low current draw matters. For 10-pin Molex operator ports, the LMA-1800-LP is EDI's low power plug-in detector.