EDI LMA 1150-HV Loop Detector ***Discontinued - Unavailable***

Discontinued by EDI. The LMA-1250-HV is the updated version. The LMA-1150-HV is a single channel DEFLECTOMETER loop detector with one programmable relay output and a rear 11-pin male Amphenol connector (86CP11). It runs on 120 to 240 VAC (95 to 250 VAC, 50/60 Hz). The housing is 2.875 x 1.375 x 3.0625 in. The relay runs presence or a 250 ms pulse and is rated 5 A. The DEFLECTOMETER display shows the detection level, loop frequency and fault codes. It has 10 sensitivity levels, sensitivity boost, four loop frequencies, a 2 second delay, 2, 5 or 10 second extension, and call memory through power losses of 4 seconds or less. Fail-safe: on a loop fault or power loss, Common closes to NO. Loop inductance range is 20 to 2500 µH and lead-in can run up to 5,000 ft. It operates from -30°F to 165°F. Before You Order No longer made. The LMA-1250-HV uses the same housing and connector and adds a second relay output. The LMA-1150-LV was the 12/24 V AC/DC version.