Ebac STC1 1352400 Kiln Controller – Proportional Timer + Thermostat, 115/230V

STC1 Kiln Controller for Ebac Lumber Dryers The STC1 is the control unit that runs Ebac timber dryers, combining an adjustable thermostat with a proportional drying timer and crossover control. It mounts outside the drying chamber so an operator can set and read the cycle without opening the kiln. STC1 1352400 Function and Fit Adjustable temperature control matches the cycle to the species and target moisture content Proportional drying timer paces moisture removal to limit splitting and case-hardening Crossover control coordinates the dryer through the stages of a drying run Exterior mounting lets staff adjust and monitor without breaking the chamber seal 115/230V, 50/60Hz covers single-phase supplies in workshop settings STC1 Applications and Environments The STC1 fits the Ebac LD800, LD82, LD3000, and FD100 lumber dryers as the original control unit, supplied with those systems and available on its own as a replacement. Sawmills and woodworking shops use it to run a repeatable drying schedule and to bring a dryer back into service after a control fault. Specifications Power Supply 115 / 230V, 50/60Hz Function Temperature, proportional drying time, crossover control Compatibility LD800, LD82, LD3000, FD100 Enclosure Plastic, kiln-exterior mount Dimensions (H×W×D) 8.0 × 8.7 × 4.3 in (203 × 222 × 108 mm) Weight 2.6 lbs (1.2 kg)   What's in the Box STC1 control panel Owner's manual Documents STC1 Spare Parts List (PDF) STC1 Wiring Diagram (PDF)