Ebac LD82 13205BB-US Lumber Dryer – 460 CFM, 110V, Up to 3m³ Loads

LD82 Lumber Dryer for Small Workshops The Ebac LD82 is a self-contained kiln dehumidifier that dries up to three cubic meters of sawn timber inside a workshop-built chamber. It runs on standard 110V power and ships with the STC1 controller, so a small mill or furniture maker can dry mixed species and thicknesses without a fired kiln. LD82 13205BB-US Drying Performance Dries mixed loads of species and thickness together without the splitting and case-hardening that fast, hot kilns cause Low-temperature operation keeps wood degrade low, which protects yield on figured and high-value stock Included STC1 controller sets temperature and proportional drying time so the cycle runs to plan 460 CFM centrifugal fan spreads air evenly through the stack for consistent moisture across the load Stainless steel collection tray resists the corrosion that constant condensate would cause in a steel pan Runs on roughly 1 kW per three hours, which keeps drying cost low over a multi-week cycle LD82 Applications and Environments The LD82 is built for small sawmills, furniture and cabinet shops, and woodworkers who air-dry then need to bring stock to interior moisture content. It mounts in a chamber the user builds from simple materials, drawing moisture out of the air so the wood gives up water gradually. At up to three cubic meters per load it suits a one-person shop or a hobbyist working valuable hardwoods. Specifications Typical Load Up to 3 m³ mixed species/thickness Airflow 460 CFM Power Supply 115V / 1-Phase / 60Hz Power (Dryer) 320 W Power (Heater) 350 W Current 7 A Max Operating Temp 113°F Control STC1 controller (included) Water Tray Stainless steel Finish Epoxy / vinyl Dimensions (H×W×D) 24 × 12 × 22 in Weight 82 lbs Documents LD82 Owner's Manual (PDF) LD82 Specification Sheet (PDF) LD82 Spare Parts List (PDF) LD82 Wiring Diagram (PDF) LD82 Wiring Schematic (PDF)