E6000+ Plus - flexible adhesive - ODORLESS!

We are happy to offer E6000+ Plus Multi-Surface Odorless Adhesive.  This is great for projects where you need a strong hold that requires a bit of flex, like adhering barrette backings to hair clips.   E6000 PLUS offers virtually the same performance characteristics you love about E6000 but without the odor! It is crystal clear, offers superb UV RESISTANCE, is paintable Remains flexible, self-levels, maintains its permanent bond strength Washer-dryer safe Waterproof  Acid-free Formulated using a premium polymer technology and can be used on most any substrate and in just about any application Excellent adhesion to Brilliant Resin, wood, glass, fabric, ceramic, gems, metal, marble, fiberglass, concrete, most plastics, and much more Follow these step-by-step directions when using E6000+ PLUS: Surface should be clean, dry and free of dirt. For best adhesion on smooth, non-porous materials, lightly roughen surface before use. Ideal application temperature range is 50 to 90ºF (10 to 32ºC). Once fully cured, the adhesive can withstand temperatures from -40 to 200ºF (-40 to 93ºC) intermittently. Puncture seal in neck of tube using pointer cap. Apply directly to surfaces to be bonded. NOTE: For non-porous surfaces, apply adhesive, mate surfaces together, pull apart for 5 minutes, then re-mate surfaces permanently. Allow 24 hours for full cure. Depending on substrates and temperature, maximum bond strength may not be reached for up 72 hours. Clean uncured adhesive with rubbing alcohol, mineral spirits, acetone or a dry cloth. Cured material may be removed with mineral spirits or by cutting or scraping. Not recommended for use on acrylic, vinyl, foam, polyethylene and polypropylene. Store in a cool, dry place. Tip: For quick emergency repairs, lightly mist the substrate with moisture prior to applying adhesive.