Semi-Hollow Double-Cutaway Electric Guitar Kit, Flame Maple Veneer, Ebonized Fretboard

Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (7/10) Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Maple Plywood is a closed-grain wood, so no grain filling is needed before finishing Tune-o-matic bridge sets intonation quickly once the posts are seated Body Material: Maple Plywood Type: Semi-Hollow Sound Holes: 2 f-holes Internal Support: Full-length center block, Maple Cutaway: Single Binding: Single Ivory Top Veneer: Flamed Maple Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: Single Ivory Fretboard Material: Ebony Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Dot Inlay Material: White Plastic Headstock Shape: Standard (as in product images) Binding: None Nut: Bone Electronics Pickup: Piezo (under-saddle) Preamp: Side-mounted, 4-band EQ Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2V, 2T, 3-Way Wiring: DIY (soldering required) Wiring Diagram: HH, 2 Volume, 2 Tone, 3-Way Toggle Switch Output Jack: Top jack Hardware Bridge: Tune-O-Matic w/ stopbar Tuners: Closed Pickguard: Black Knobs: Gold Cavity Covers: Black Strings: Steel Finish: Gold What's in the Box Semi-hollow guitar body with flame maple top and twin f-holes (unfinished) Guitar neck with black fretboard and white dot inlays 6x gold sealed tuners with bushings and washers 2x humbucker pickups with gold covers Gold bridge with six adjustable saddles Gold stop tailpiece 4x gold posts and studs for the bridge and tailpiece Wiring harness with four potentiometers, wires and output jack 3-way toggle switch with gold cap and mounting hardware 4x gold dome knobs Black pickguard with mounting bracket Black truss rod cover with screws 2x gold strap buttons with screws Coil of wire Assorted washers and nuts 2x Allen wrenches Black instrument cable What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.