DynoJet Launch Control Module | Can-Am X3

Standard 2200 RPM Launch Control Setting Requires the KWI Blue Primary Spring (2500 RPM Engagement) previously found in KWI's AO Clutch Systems (PLEASE NOTE: KWI now supplies the Blue/Orange Primary Spring with all clutch systems, this does NOT support our launch control configuration. Other vendor clutching systems will support this with similar engagement springs Enhanced 2600 RPM Launch Control Setting Requires the KWI Pink Primary Spring   The Dynojet Launch Control Module(LCM) is designed to allow the machine to have a controlled, consistent launch rpm by cutting ignition at the desired rpm, as well as build boost by controlling ignition retard. This unit can be added to any machine or any ones tuning and allows the user to be able to fine tune the launch rpm and how aggressive the machine will leave.  Launch Control Operation: LCMs come standard with an operations delay Older LCMs came configured with a three second delay between pushing the activation button and actual LCM activation has updated this to now include a one second delay as of Feb. 1st, 2022 For proper operation please press the LCM momentary switch, wait one second and then apply gas pedal for LCM activation The LCM has the ability to retard up to 40*. The ignition retard allows for more heat in the exhaust which assists the turbos shaft speed creating more boost.  The LCM will be sent with our standard setting of 2200 RPM cut with -30* of retard. We also offer a 2600 RPM setting that can come preloaded. This can be modified by the user. We can configure and assist the user with setup and if using our tune, combine both the LCM and our tuning for best results.