DX4.0 4-Input, 8-Output 96kHz Loudspeaker Processor and Matrix

The DX4 is a 4 input and 8 output loudspeaker controller. From The Manufacturer: The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz. Features Four input channels and eight output channels loudspeaker processor and matrix Analogue, AES3 and Dante™ digital audio inputs High performance 96kHz DSP Remote control and monitoring over Ethernet via Martin Audio VU-NET software FIR optimisation for Martin Audio’s O-Line VX limiting allows a passive enclosure the same protection as a fully active unit. Comprehensive suite of EQ’s, delays and all pass filters. Global mains operation 100-240V, 50-60Hz Applications: Loudspeaker system digital controller Front-of-house matrix to feed Dante digital audio to iKON amplifiers powering Martin Audio loudspeaker systems Use with Martin Audio O-Line for FIR Optimisation Use with Martin Audio U-Hub to feed digital audio and network to an MLA Series array/subwoofer array via a single cable Specifications: Type 4 input/8 output digital loudspeaker processor Operating Temperature 0 to 45°C Humidity Range 0 to 80% RH (non-condensing) Input Impedance >10kΩ balanced Output Impedance <100Ω balanced Max Input Level +20dBu Max Output Level +18dBu into 600Ω Frequency Response 10Hz - 40kHz Input Dynamic Range >120dBa typ. Output Dynamic Range >118dBa typ. Total Harmonic Distortion <0.008% typ. 20Hz-20kHz Sample Rate 96kHz AES3 Input Sample Rate 28kHz – 108kHz AES3 Output Sample Rate 96kHz AC Operating Range 100-240V +/-10% Power Consumption 30W Protocol Ethernet Control Application Martin Audio VU-NET™ Audio Input 4 x 3 pin female XLR for analogue or AES3 pairs Audio Output 8 x 3 pin male XLR for analogue or AES3 pairs Ethenet 1 x shielded RJ45 Dante™ Network 2 x shielded RJ45, primary and secondary AUX Port Phoenix connector for contact closure Mains Power 3 pin IEC Dimensions (W) 482mm x (H) 1U/44mm x (D) 184mm (W) 19in x (H) 1U/1.75in x (D) 7.2in Weight 2.7Kg  6lbs