DustControl DCF60 Pre-Separator

DustControl DCF60 Pre-Separator When large quantities of material are to be separated, it is advisable to use a pre-separator. The pre-separator can be placed at the work place or in conjunction with the central unit. Features Especially suited for parquet grinding High speed cyclone For an easy transport the lock can be reversed an put into the container Robust steel container Can be connected to our dust extractors DC 1800 eco, DC 2900a/c eco and DC 3900a/c eco The pre-separator DC F60 can handle large quantities of dust, especially in the case of parquet grinding Due to its large inlet the pre-separator is also well suited to separate coarse dirt Because 90% of the dust is already separated in the DC F60, the number of emptying trips is reduced considerably for the user Can also be equipped with our tear-resistant plastic sacks (Part no 42285) When a pre-separator is to be used the following should be considered Type of dust to be handled Where the unit should be placed and how emptying will be performed Expected airflow Pre-separators should be used For material recovery Material transportation To reduce the loading on the ducting system To relieve loading on the central filter To reduce the risk for filter clogging When fluids are to be separated Pre-separators can be used in all applications where the extracted material is coarse or voluminous These can be placed in the actual workplace for separate handling or recovery of the extracted material, or centrally Pre-separators separate material from the air-flow using the action of a cyclone or with inertial separation. Inertial separators are generally configured as containers with the inlet and outlet in the same wall of the container When the air-flow changes direction abruptly, separation occurs for the particles with higher relative mass