30" Wide DTF Transfer Rolls

Vibrant, soft-feel transfers ready to press in seconds. Available in Hot Peel and Cold Peel options for fast or controlled production — just press and peel! Need to build your gang sheet? Build it for free here! https://gangfx.com/b/neko-prints Why Our DTF Transfers Stand Out What truly sets us apart? Size. While most DTF transfer providers max out at 22 inches wide, our transfers are a full 30 inches wide — giving you more coverage, fewer seams, and bigger, bolder prints with every press. Hot Peel: Peel while still warm for fast, efficient production Cold Peel: Wait until fully cooled for a softer, more vibrant finish 30" wide vs. the industry-standard 22" — that's 36% more print area Select your size and peel type below. Upload your design file when prompted. DTF Transfers - Recommendations Pre-heat the garment for about 3-5 seconds to remove excess moisture and iron the fabric. Then depending on DTF Material peel: Cold Peel Temperature to be set to: 310 - 325f Degrees - For Cotton 295 - 315f Degrees - For Cotton/Polyester 265 - 285f Degrees - For Polyester Heat Press Time - First Press: 10-15 Seconds for the first press Peel Type: Cold peel - After pressing, let cool for 1-2 minutes then peel. Heat Press Time - Second Press - After Peeling: We recommend pressing a second time for 3-5 seconds with a teflon sheet, parchment paper or any other similar type sheet. HOT Peel Temperature to be set to: 280 - 310 Degrees - For Cotton 280 - 300 Degrees - For Cotton/Polyester 260 - 280 Degrees - For Polyester Heat Press Time - First Press: 12 Seconds for the first press Peel Type: HOT peel - After pressing, Peel INSTANTLY. Do not wait. If item cools and/or does not peel, reheat a few seconds. Heat Press Time - Second Press - After Peeling: We recommend pressing a second time for 3-5 seconds with a teflon sheet, parchment paper or any other similar type sheet. These are recommendations only. Temperature and Press time may vary based on Heat Press and materials.